The DragonStage 30–37cm Adjustable Folding LED Wall Rear Support Bracket combines a telescopic support arm, a round-tube truss clamp, and two hinged mounting plates with elongated fixing slots.
The 300–370mm (11.81–14.57in) adjustable length allows the connection distance to be selected within the specified range, while the folding plate assembly provides an adjustable mounting geometry for compatible LED screen rear interfaces.
The black support bracket features a hand-operated star locking knob, mechanical hinge connection, and slotted mounting plates.
Designed for LED screen rental companies, AV installers, event truss equipment suppliers, and custom LED display installations requiring a folding rear connection.
Before ordering, confirm the truss tube diameter, mounting plate dimensions, usable hinge angle, load requirements, and LED screen interface compatibility.
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
Not every LED screen support arrangement uses a single flat mounting plate.
Some installation layouts require the rear connection to follow a different mounting angle or connect to two suitable attachment surfaces.
A conventional fixed plate may not accommodate the required geometry.
The DragonStage Adjustable Folding LED Wall Rear Support Bracket provides a telescopic connection between a compatible supporting tube and a hinged plate assembly.
The product has a stated adjustable length of:
30–37cm / 300–370mm (11.81–14.57in)
The main construction includes:
Telescopic support arm
Hand-operated star locking knob
Round-tube truss clamp
Hinged dual-plate mounting assembly
Elongated mounting slots
Mechanical fastening components
The mounting end consists of two separate plates connected through a central hinge.
Each plate features elongated fixing slots, allowing appropriate fasteners to be positioned according to the actual mounting interface.
The hinged arrangement provides a different connection geometry from a conventional single flat plate.
This makes the product a potential option for compatible LED screen rear connections where both the attachment distance and plate arrangement must be considered.
The complete bracket must be selected according to actual dimensions, mounting geometry, and verified loading requirements.
The specified adjustment range is:
Minimum length: 300mm / 11.81in
Maximum length: 370mm / 14.57in
Adjustment difference: 70mm / 2.76in
The exact measurement reference points should be confirmed from the product drawing.
Unlike a conventional single mounting plate, this bracket features two separate plates connected by a hinge.
The plates can be positioned according to the available hinge geometry.
This may be useful for non-flat or differently oriented compatible mounting interfaces.
The permitted hinge angle and locking requirements must be verified before installation.
Each plate includes elongated mounting slots.
These provide alternative fastener positions within the actual slot dimensions.
The mounting-hole pattern must match the intended LED screen connection.
The main support arm uses a telescopic design.
This allows the installer to select a suitable connection length within the stated adjustment range.
A hand-operated locking knob is positioned along the telescopic arm.
It is used to secure the selected length according to the manufacturer's fastening procedure.
The opposite end features a round-tube clamp for attachment to a compatible supporting tube.
The actual supported tube diameter must be confirmed.
The complete assembly has a black appearance suited to event installations where dark mounting hardware is preferred.
Specification | Details |
|---|---|
Brand | DragonStage |
Product Type | Folding LED Wall Rear Support Bracket |
Adjustable Length | 300–370mm |
Imperial Equivalent | 11.81–14.57in |
Adjustment Difference | 70mm / 2.76in |
Length Adjustment | Telescopic Tube |
Length Locking | Star-Shaped Knob |
Equipment-Side Connection | Hinged Dual Mounting Plates |
Mounting Plate Quantity | 2 |
Mounting Slots | Elongated Slots |
Truss-Side Connection | Round-Tube Clamp |
Finish | Black |
Intended Application | Compatible LED Screen Rear Support and Positioning |
The 30–37cm adjustment range is supplied product information. The hinged plate design, telescopic arm, locking knob, and truss clamp are visible in the product photographs.
Position the round-tube clamp on a compatible supporting member.
Confirm the actual tube diameter before fastening.
Select the required connection distance within the specified 300–370mm range.
Arrange the two mounting plates according to the intended equipment interface and the hinge's permitted positions.
Use suitable fasteners through the elongated slots.
The actual hole spacing, plate orientation, and fastening requirements must match the LED support interface.
Tighten the telescopic locking mechanism and all required connections using the designated procedure.
Check the complete connection, including the hinge, plates, supporting tube, fasteners, LED screen interface, and supporting structure.
The bracket's adjustable geometry does not establish its allowable load capacity.
Rental LED screen companies may need different mounting accessories for different support configurations.
The folding plate design may be useful where a conventional flat plate cannot match the required mounting geometry.
Some custom display arrangements require attachment interfaces positioned at different angles.
A hinged mounting assembly may accommodate suitable interface geometry within its verified limits.
The telescopic arm provides length adjustment while the hinged plates provide a separate mounting-position feature.
The bracket may be used with a suitable round-tube support where the clamp connection and complete installation have been verified.
AV contractors may consider this type of bracket for specialized rear mounting arrangements requiring a folding plate connection.
You need a 30–37cm adjustable connection length.
The mounting interface requires two hinged plates.
A conventional single flat mounting plate does not match the connection geometry.
Your supporting tube fits the verified clamp specification.
The complete connection can be verified for the intended application.
The LED screen uses a standard flat rear connection and does not require a hinged plate assembly.
A simpler compatible support may avoid unnecessary adjustment components.
Measure the actual distance between the supporting tube and the LED screen mounting interface.
The usable adjustment range must match the required installation dimensions.
Confirm whether the two hinged plates can engage the intended mounting surfaces within the manufacturer's permitted hinge positions.
Measure the actual supporting tube diameter rather than relying only on the nominal truss system name.
For comparison with a standard truss clamp interface, review the Black 48–51mm Aluminum Gripper Clamp.
This is a separate clamp product and is not a verified replacement for the supplied bracket clamp.
This product provides a telescopic arm and two hinged mounting plates.
Choose it where the actual mounting geometry requires these features.
For an installation where the main requirement is screen alignment rather than a folding rear connection, consider the Adjustable LED Screen Leveling Spacer Block.
For a dedicated LED screen hanging interface, review the Steel LED Video Wall Hanging Hook for Truss Mounting.
A hanging hook and a rear positioning support perform different functions.
Where the installation design specifies a cable restraint, the Stainless Steel LED Screen Tightening Cable may be relevant.
It must not be treated as interchangeable with the folding bracket.
The required quantity depends on the actual LED screen support design.
It cannot be calculated from the number of LED cabinets alone.
For procurement planning:
Required Quantity = Number of Designated Compatible Mounting Positions
For example, if a verified installation specifies four locations using this exact bracket:
4 connection positions × 1 bracket = 4 brackets
This is an inventory calculation, not a recommendation that four brackets are sufficient for a particular LED wall.
For large LED screen installations, the connection quantity and positions must follow a project-specific structural assessment.
For one designated rear connection, the main component groups include:
Component | Configuration |
|---|---|
Telescopic Support Arm | 1 assembly |
Star Locking Knob | Integrated |
Hinged Dual-Plate Assembly | 1 matched set |
Round-Tube Clamp | 1 matching component |
Hinge Fastening Hardware | According to design |
Plate Connection Hardware | According to interface |
Compatible Supporting Structure | Required |
The final package contents must be confirmed before ordering.
Compatible supporting tube
Matching LED screen rear interface
Suitable fastening hardware
Confirmed mounting dimensions
Verified supporting arrangement
LED screen leveling accessories
Dedicated hanging components where required
Appropriate restraint accessories
Alternative mounting clamps
For screen positioning and alignment, explore the Adjustable LED Screen Leveling Spacer Block.
For a different hanging connection, review the Steel LED Video Wall Hanging Hook.
For support arrangements requiring a specified cable accessory, see the Stainless Steel LED Screen Tightening Cable.
For comparing round-tube attachment designs, explore the 6061 Aluminum Half Coupler.
The Black 48–51mm Aluminum Gripper Clamp provides another clamp configuration for comparison.
Compatibility Notice: These products are related mounting accessories and alternatives, not confirmed interchangeable components.
The stated range is 300–370mm.
Confirm the measurement reference points and actual usable extension before installation.
The hinged plates must be positioned and secured according to their specified operating limits.
Do not assume the hinge is suitable for adjustment while carrying a load.
The clamp must match the supporting tube.
The fastener diameter and hole positions must match the intended connection.
All forces transferred by the bracket also act on the hinge, fasteners, clamp, supporting structure, and LED screen interface.
The bracket is not automatically suitable for primary LED screen suspension or lifting.
Outdoor LED walls can experience substantial wind loading.
A folding rear support bracket alone does not establish the stability of the complete installation.
Large or structurally significant LED screen systems require project-specific technical assessment.
The 30–37cm range is important, but the hinge geometry and mounting interface must also match.
The actual permitted hinge angle range has not been confirmed.
The tube diameter and connection geometry must be checked.
Rear positioning and primary suspension are different functions.
The permitted forces must be established for the complete connection.
The slotted plates must fit the actual LED screen interface.
The stated adjustable range is 30–37cm (300–370mm).
It combines a telescopic arm with two hinged mounting plates.
The photographs show a hinged plate assembly. The actual permitted folding-angle range must be confirmed.
A round-tube clamp is shown as part of the assembly. The final supplied components must be confirmed.
The compatible tube diameter has not yet been confirmed.
The illustrated hinge assembly contains two mounting plates.
No. The plate hole pattern, mounting geometry, and support requirements must be compatible.
A verified rated load capacity has not been supplied.
Large outdoor LED walls require project-specific structural review. This bracket alone is not a complete support solution.
Provide the required connection distance, tube diameter, mounting-hole dimensions, required hinge angle, LED screen model, quantity, and intended installation arrangement.
Need an adjustable rear connection with a folding mounting plate?
The DragonStage Folding LED Wall Rear Support Bracket combines:
30–37cm telescopic adjustment
Dual hinged mounting plates
Slotted fixing holes
Star locking knob
Round-tube truss clamp
Black finish
For a quotation, please provide:
Required quantity
Supporting tube outside diameter
Required connection length
Mounting-hole dimensions
Required plate angle
LED screen model or mounting-interface drawing
Intended loading and installation orientation
Delivery destination
Contact DragonStage for pricing, dimensional confirmation, and compatible support bracket options.
For large LED walls or other structurally significant installations, request a project-specific technical review.