The 50mm Aluminum Truss Clamp with Steel Mounting Plate is an LED screen connection accessory featuring a silver aluminum alloy tube clamp and a black steel plate with multiple radial mounting slots.
Designed for nominal Ø50mm (1.97in) truss tubes, the assembly uses a threaded clamp bolt and wing-nut fastening arrangement to connect the bracket to a compatible round tube.
The slotted steel plate provides multiple mounting positions for suitable LED screen support interfaces and other compatible equipment connections.
Suitable for event equipment installers, LED screen rental companies, and AV technicians who need a truss-to-plate connection accessory.
Important: Tube fit, plate-hole compatibility, fasteners, permissible loads, and the complete supporting arrangement must be confirmed before use. This product should not be assumed to be a certified LED wall suspension device.
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
When installing event equipment near an aluminum truss, one common problem is connecting a round truss tube to a component that uses a flat mounting plate.
A round tube and a flat bracket use different connection geometries.
The DragonStage 50mm Aluminum Truss Clamp with Steel Mounting Plate is designed to provide an interface between these two connection types.
The assembly consists of:
An aluminum alloy clamp for a nominal 50mm round tube
A threaded fastening bolt with wing-nut arrangement
A black steel mounting plate
Multiple elongated mounting slots
A central plate connection assembly
The aluminum clamp attaches to a compatible truss tube while the steel plate provides a flat mounting interface for equipment or support components designed to connect to it.
The plate's radial slot pattern offers several possible mounting positions, helping installers accommodate suitable bolt positions within the actual slot geometry.
This can be useful for selected LED screen installations and other event equipment applications where a matching plate connection is required.
However, the plate must match the actual equipment attachment points, and the complete connection must be verified for the intended load and installation orientation.
The clamp is intended for a nominal Ø50mm (1.97in) round tube.
This is a common main-chord size in many aluminum event truss systems.
However, not every 50mm truss clamp has the same opening geometry or allowable loading.
Confirm the actual clamp size and the tube outside diameter before ordering.
The clamp body is manufactured from aluminum alloy.
The silver metallic finish contrasts with the black steel mounting plate.
The exact aluminum alloy grade and manufacturing specification should be confirmed where required.
The bracket uses a flat black steel plate with rounded corners.
This provides a mounting surface for equipment using a compatible bolted interface.
The steel plate is a separate functional component from the aluminum tube clamp.
The plate features several elongated slots arranged around the central connection.
This design provides alternative fastener positions for suitable mating components.
It can help accommodate different mounting patterns within the available geometry.
The plate does not provide unlimited hole-spacing adjustment, and the supported mounting patterns must be verified.
The aluminum clamp uses a threaded bolt and wing-nut-style fastening arrangement.
The hardware allows the clamp to be positioned around a compatible tube and secured using its designated tightening method.
The correct tightening procedure and torque must follow the manufacturer's requirements.
This assembly combines a round-tube clamp and flat mounting plate in one accessory.
It is relevant to buyers who need a connection interface rather than a complete LED wall support structure.
Specification | Details |
|---|---|
Brand | DragonStage |
Product Type | LED Screen Truss Mounting Bracket |
Clamp Material | Aluminum Alloy |
Mounting Plate Material | Steel |
Nominal Tube Diameter | 50mm / 1.97in |
Clamp Finish | Silver |
Plate Finish | Black |
Plate Shape | Square-style plate with rounded corners |
Mounting Slots | Multiple radial elongated slots |
Clamp Fastening | Threaded bolt with wing nut |
Plate Connection | Central fastening assembly |
Intended Application | Compatible LED screen and event equipment connections |
The clamp and plate construction is identified from the supplied product images. The 50mm nominal tube size and material combination are provided product specifications. No rated load capacity or certified rigging application has been established.
The aluminum clamp is positioned around a compatible round truss tube.
The clamp fastening assembly secures the bracket to the tube according to the specified installation procedure.
The truss tube and clamp must be suitable for the proposed connection.
The black steel plate provides a flat connection surface.
Its slotted geometry allows fasteners to be positioned at selected locations.
The actual mounting-hole pattern and dimensions must match the equipment being connected.
A compatible LED screen bracket or supporting component may connect to the slotted plate using the appropriate fasteners.
The completed connection must be assessed for the intended load direction, equipment geometry, and support conditions.
This bracket is only one component of the full support system. It does not independently establish a safe LED wall mounting design.
The bracket can be considered where an LED screen support component requires a plate-style connection to a suitable round truss tube.
The LED cabinet or supporting interface must have a compatible attachment arrangement.
Rental companies frequently work with different screen cabinets and support accessories.
A truss-to-plate mounting accessory may be useful when the actual equipment interface is compatible.
However, rental LED panels from different manufacturers should not be assumed to share the same mounting-hole geometry.
The plate may also serve as an interface for other compatible event equipment where the connection and allowable loading have been established.
For AV installers working with a suitable truss support, this type of bracket may be considered as part of a properly specified mounting arrangement.
Start by confirming the outside diameter of the tube where the clamp will be installed.
This product is specified for a nominal 50mm tube.
If you are selecting a conventional truss clamp rather than an LED mounting bracket, you can compare the Black 48–51mm Aluminum Gripper Clamp.
That product is a separate clamp type, not a confirmed substitute for the complete LED plate assembly.
Measure the mounting-hole positions on the LED screen frame or the manufacturer's support component.
Important details include:
Hole center spacing
Fastener diameter and thread
Required plate orientation
Required clearance
Actual contact and connection geometry
Do not assume that a multi-slot plate fits every LED cabinet.
Identify how the bracket will be used.
A connection supporting equipment laterally can experience different forces from a bracket used for vertical suspension.
The bracket's permissible loading must be verified for the actual orientation and configuration.
The clamp, supporting truss, plate, fasteners, and LED equipment interface must form a compatible assembly.
If the installation uses an elevated or freestanding support, the overall structural arrangement also requires assessment.
A truss-to-plate clamp is not the appropriate solution for every LED wall installation.
Where the installation requires a dedicated truss-hanging arrangement, explore the Steel LED Video Wall Hanging Hook for Truss Mounting.
That is a different accessory type, and its suitability must be verified independently.
Nominal tube size:
Ø50mm / 1.97in
Actual clamp fit must be confirmed.
Not confirmed for any specific cabinet manufacturer or model.
Before ordering, customers should supply the LED screen manufacturer's mounting dimensions or a photograph with measurements.
The slot pattern provides multiple potential fastener positions, but actual compatibility depends on:
Slot geometry
Fastener size
Equipment mounting pattern
Required clearance
Connection strength
Installation orientation
Potential tube fit must be checked using the actual main-chord diameter and clamp geometry.
Even where a 50mm tube fits, this does not automatically establish that the truss and connection can support the intended LED equipment.
The required quantity cannot be calculated from the number of LED panels alone.
For example, a buyer installing a rental LED wall may have multiple cabinets arranged in rows and columns, but the attachment requirements depend on the actual cabinet and supporting structure.
The required connector quantity is determined by:
The LED cabinet manufacturer's approved support arrangement
The number and location of attachment points
The dimensions and weight of the complete installation
The mounting orientation
The supporting truss or frame
The load distribution and connection design
Do not assume one bracket per LED cabinet or one bracket per corner.
For installations involving a large LED wall, unusual loading, or significant wind exposure, the complete system requires project-specific engineering review.
For a compatible truss-to-plate connection, the principal components are:
Component | Requirement |
|---|---|
50mm Aluminum Truss Clamp | 1 matched component |
Black Slotted Steel Plate | 1 matched component |
Central Clamp-to-Plate Connection | Matched assembly |
Clamp Fastening Hardware | As specified |
Compatible Equipment Fasteners | According to equipment interface |
Suitable Supporting Truss | Required for truss installation |
The supplied item is the bracket assembly. Exact included bolts, washers, nuts, and other hardware must be confirmed in the final quotation.
Compatible LED screen mounting interface
Suitable fasteners
Supporting structure appropriate for the installation
Any required secondary retention or restraint components
Other LED screen mounting accessories may be appropriate depending on the actual installation.
For example, the Adjustable LED Screen Leveling Spacer Block is intended for a different adjustment function.
For certain manufacturer-approved support arrangements, the Stainless Steel LED Screen Tightening Cable may also be relevant.
Neither accessory should be assumed compatible with this bracket or used as a substitute for a verified primary support connection.
DragonEvent offers several different types of mounting components for event truss and LED display applications.
Steel LED Video Wall Hanging Hook for Truss Mounting
A different mounting accessory to evaluate when the application involves a dedicated LED wall hanging interface.
Adjustable LED Screen Leveling Spacer Block
A related adjustment product for suitable LED support arrangements.
Stainless Steel LED Screen Tightening Cable
A separate restraint-related product whose intended use and load conditions must be independently confirmed.
400kg Aluminum Stage Lighting Clamp for 38–52mm Tubes
An alternative clamp product for comparing tube diameter and clamping designs. Its listed rating does not apply to this LED bracket.
6061 Aluminum Half Coupler for Event Truss
A related aluminum clamp product for buyers comparing connection interfaces.
Compatibility Note: These links show related product choices, not a verified list of interchangeable components.
Before installation, verify the actual tube diameter and the clamp's specified opening geometry.
The steel mounting plate should be positioned according to the required equipment interface and permitted installation orientation.
The bolt dimensions, thread engagement, washers, and other fastening details must match the actual connection.
Loads transferred through the LED bracket also act on the clamp, supporting truss, and any connected structure.
All relevant components must be suitable for the intended forces.
The bracket must not be assumed to resist arbitrary torsional or eccentric loads.
Any required resistance to rotation, sliding, or loosening must be established from the complete connection design.
This accessory must not be used to lift or suspend an LED wall unless the exact bracket, connection arrangement, and complete support system have been verified and approved for that purpose.
Outdoor LED screens may be subject to significant wind effects.
A clamp and mounting plate alone do not establish adequate wind resistance, ballast, anchorage, or structural stability.
Outdoor LED wall support should be handled through a project-specific technical review.
A matching tube diameter does not establish allowable loading or connection compatibility.
The slots offer alternative mounting positions, but the actual LED cabinet hole geometry must match.
This product is one connection component.
It does not replace the supporting truss or frame, required restraints, or a complete structural design.
Vertical suspension, lateral restraint, and other mounting arrangements can produce different forces on the clamp and plate.
The mating fasteners must match the plate slots and the intended equipment interface.
Increasing bracket quantity does not by itself establish correct load distribution or structural capacity.
It provides a clamp-to-plate connection interface between a compatible round truss tube and suitable LED screen support equipment.
The specified nominal tube size is 50mm (1.97in).
The clamp is aluminum alloy, and the black slotted mounting plate is steel.
The slots offer alternative mounting positions for suitable mating hardware within the available slot geometry.
No. The LED cabinet or support interface must have compatible mounting dimensions and fastener requirements.
Potential compatibility depends on the actual tube diameter, clamp geometry, mounting location, and complete structural requirements.
A verified working load limit has not yet been provided for this product.
Only if the exact bracket and complete supporting arrangement are verified for that specific suspension application. Its appearance alone does not establish lifting or hanging capacity.
The quantity depends on the LED manufacturer's mounting requirements and the complete support design. It cannot be determined from cabinet count alone.
Please provide the truss tube diameter, LED screen model, mounting-hole dimensions, connection orientation, intended loading, and quantity required.
Need a connection between a 50mm aluminum truss tube and a flat LED screen mounting interface?
The DragonStage LED Screen Truss Mounting Bracket combines a silver aluminum clamp with a black slotted steel plate for compatible event equipment mounting applications.
To select the correct product, please provide:
Required quantity
Truss tube outside diameter
LED cabinet or mounting-interface model
Mounting-hole positions and fastener dimensions
Intended installation orientation
Equipment loading requirements
Delivery destination
Contact DragonStage for pricing, dimensional confirmation, and product compatibility review.
For larger LED walls or structural suspension applications, please provide the complete installation requirements for project-specific technical assessment.