Black 48–51mm Aluminium Gripper Clamp for Stage Lighting, Truss Mounting & Event Rigging

• 6061 Aluminium Construction
  The supplied product specification identifies 6061 aluminium as the material.

• 250kg Safe Working Load
  The stated SWL is 250kg. Confirm the rating conditions and the suitability of the complete installation before use.

• 48–51mm Tube Compatibility
  Designed for use with compatible round tubes within the specified 48–51mm diameter range.

• Lightweight 0.48kg Design
  The stated product weight is 0.48kg, making the clamp practical to handle during equipment setup and dismantling.

• Black Finish
  The reference product is described as black anodised. Confirm the finish on the exact DragonEvent item before publication.

• For Stage Lighting and Event Rigging
  Suitable for consideration in compatible lighting, truss mounting and event production setups, subject to connection and load requirements.

• Practical Mounting Accessory
  Can be used as part of a compatible tubular mounting arrangement when the clamp interface and supporting structure are appropriate.

The DragonEvent Black Aluminium Gripper Clamp can be considered for compatible installations such as:

• Stage lighting fixture mounting

• Concert and live-event lighting rigs

• Event truss mounting arrangements

• Entertainment and performance venues

• Temporary event structures

• Lighting equipment installation and maintenance

• Compatible tubular support systems

For broader event infrastructure options, browse DragonEvent's Truss & Rigging category. For related connection and mounting components, see Truss & Rigging Accessories.

Compatibility & Installation Notes

Before selecting this clamp for a project, review the following points:

1. Confirm tube diameter
   Check that the mounting tube has an outer diameter within the specified 48–51mm range.

2. Check the mounting interface
   Confirm that the clamp can connect correctly to the intended fixture or equipment and that all required connection components are suitable.

3. Verify the load requirements
   The supplied SWL is 250kg. Do not exceed the applicable rating, and do not assume that the clamp rating establishes the capacity of the entire support system.

4. Inspect the clamp before use
   Check for visible damage, deformation, worn contact surfaces or problems with the fastening mechanism before installation.

5. Assess the complete installation
   The supporting tube or truss, clamp, fixture, fasteners and rigging method must all be suitable for the intended application. Where the load rating or installation conditions are uncertain, obtain confirmation before use.

6. Confirm product-specific design details
   The reference page describes a captive T-handle and wrap-around profile. Verify these details against the actual DragonEvent item before relying on them for purchasing or installation decisions.

1. What is the DragonEvent Black Aluminium Gripper Clamp used for?

It is a mounting accessory for compatible stage lighting and event equipment that needs to be attached to a suitable round tube or truss structure.

2. What material is the clamp made from?

The supplied specification identifies the material as 6061 aluminium.

3. What is the safe working load?

The supplied specification states an SWL of 250kg. Confirm the rating conditions and ensure the complete installation is suitable for the intended load.

4. What tube diameter is compatible with this clamp?

The supplied specification gives a compatible tube diameter range of 48–51mm.

5. How much does the clamp weigh?

The stated product weight is 0.48kg.

6. Is the clamp black?

The reference product page describes a black-anodised clamp. The finish of the exact DragonEvent item should be confirmed before ordering.

7. Can it be used with any stage lighting fixture?

No. Compatibility depends on the tube diameter, the fixture's mounting interface and the complete installation requirements. Check these details before purchasing.

8. Does the 250kg SWL mean the complete rig can support 250kg?

Not necessarily. The stated SWL is a product specification and does not establish the capacity of the entire rigging arrangement. The clamp, supporting structure, connected equipment and installation method must all be suitable for the application.

9. What is included in the package?

The supplied information does not confirm the package contents. Confirm whether any additional fasteners or mounting components are included before placing an order.