Half Coupler Spacer for Concert Truss Alignment, Stage Extensions & Event Structures

• Half Coupler and Spacer Configuration
  Designed as a combined coupler and spacer accessory for compatible truss connection arrangements.

• 48–51mm Tube Compatibility
  The supplied specification identifies a compatible tube diameter range of 48–51mm. Confirm the actual outside diameter and connection interface before ordering.

• Stated 500kg Loading Capacity
  The supplied information lists a loading capacity of 500kg. Confirm the rating definition and applicable conditions before using this value for project planning.

• 330cm Tube Length Listed
  The supplied specification lists a tube length of 330cm. This dimension must be checked against the intended model because the reference product title identifies a 210mm spacer.

• Silver and Black Colour Options
  The supplied information identifies silver and black as available colours. Confirm which colour applies to the selected version.

• For Compatible Stage and Event Truss Systems
  Can be considered for stage construction, concert truss, and event structures where the component dimensions and connection geometry match.

• Useful for Special Truss Configurations
  A coupler-and-spacer arrangement can help accommodate specific spacing requirements when the system components are compatible.

The DragonEvent Half Coupler Spacer can be considered for compatible connection requirements in:

• Concert truss installations

• Stage construction

• Live event support structures

• Exhibition and trade-show structures

• Event production systems

• Compatible modular truss assemblies

• Truss configuration adjustments where additional spacing is required

• Replacement of an existing compatible coupler spacer

For related event structure products, visit Truss & Rigging. For compatible connection and mounting accessories, browse Truss & Rigging Accessories.

Compatibility & Installation Notes

Before ordering or installing this half coupler spacer, review the following points:

1. Verify the tube diameter
   The supplied specification lists compatibility with 48–51mm tubes. Measure the actual tube and check the connection interface.

2. Confirm the spacer length
   The supplied specification lists 330cm, while the reference product title identifies a 210mm spacer. Confirm the intended dimension before purchase or publication.

3. Clarify the loading capacity
   Confirm whether the stated 500kg refers to a safe working load, a component rating, or another loading measure. Do not assume it is the allowable load of the complete structure.

4. Check the coupler interface
   Confirm that the half coupler and spacer connection match the intended truss system and mating components.

5. Confirm colour availability
   The supplied specification lists silver and black. Verify the available finish for the selected version.

6. Review the complete support system
   The truss, coupler, spacer, pins or fasteners, and supporting structure must all be suitable for the intended application. Obtain relevant technical documentation for load-critical installations.

1. What is a half coupler spacer used for?

It is a truss connection accessory combining a half coupler and spacer to accommodate specific dimensions or spacing requirements in compatible stage and event structures.

2. What tube diameter is this product designed for?

The supplied specification lists 48–51mm. Confirm the tube outside diameter and the connection geometry of the existing system before ordering.

3. What is the stated loading capacity?

The supplied specification lists 500kg. The applicable rating definition and test conditions have not been confirmed, so this figure should be verified before use in load-critical applications.

4. What is the spacer length?

The supplied specification lists 330cm, but the reference product title identifies a 210mm spacer. The correct length must be confirmed before publication.

5. Which colours are available?

The supplied information lists silver and black. Confirm the available colour for the intended model.

6. What material is the product made from?

The material was not specified in the information supplied for this listing. Confirm the material with the product documentation before publication if required.

7. Can this accessory be used with any truss system?

No. Compatibility depends on the tube diameter, coupler interface, spacer configuration, and the specific truss system. Verify compatibility before installation.

8. Does the 500kg figure confirm the capacity of the complete truss structure?

No. A component loading figure does not independently establish the capacity of the complete structure. The coupler spacer, truss, fasteners, and supporting system must all be appropriate for the intended application.