Aluminium Claw Clamp for 50mm Truss Tubes, Stage Structures & Event Rigging

• 6082 Aluminium Construction
  Specified as 6082 aluminium for compatible tubular structure connections.

• Three Tube Configurations
  Designed for the listed tube sizes: 50 × 2mm, 50 × 3mm, and 50 × 4mm.

• Claw-Style Connection
  Intended for use with compatible claw-style connection components and matching structural interfaces.

• Lightweight 0.25kg Design
  The stated product weight is 0.25kg.

• For Modular Aluminium Tube Structures
  Suitable for consideration in compatible stage truss, exhibition, and event structure assemblies.

• Useful for Structure Assembly and Maintenance
  Can be considered for replacement or maintenance when the existing tube dimensions and connection interface match.

• Designed for Compatible Components
  Verify the connection geometry and structural requirements before combining the clamp with other system components.

The DragonEvent Aluminium Claw Clamp can be considered for compatible connection requirements in:

• Stage truss construction

• Exhibition booth structures

• Event support structures

• Modular aluminium tube assemblies

• Stage and theatre infrastructure

• Event structure maintenance and replacement

• Compatible aluminium tube connection systems

For related event structure products, visit Truss & Rigging. For additional connection and mounting components, browse Truss & Rigging Accessories.

Compatibility & Installation Notes

Before ordering or installing this claw clamp, review the following points:

1. Confirm the tube size
   The supplied specifications list 50 × 2mm, 50 × 3mm, and 50 × 4mm tube configurations. Confirm the outside diameter and wall thickness of the actual tube.

2. Check the connection geometry
   Ensure that the claw interface matches the mating component. The detailed interface dimensions have not been supplied.

3. Verify the intended application
   The supplied information does not specify a working load limit or approve the product for suspended loads. Do not assume a load capacity without relevant technical documentation.

4. Inspect components before assembly
   Check the clamp and mating parts for deformation, cracks, damage, or excessive wear before installation.

5. Confirm structural suitability
   The tube, connection accessories, supporting structure, and assembly method must all be appropriate for the intended application.

6. Request technical documentation when needed
   For load-bearing or safety-critical structures, confirm the applicable design limits and required documentation before use.

1. What is the Aluminium Claw Clamp used for?

It is a connection accessory intended for compatible aluminium tube structures used in stage trussing, exhibition installations, and event infrastructure.

2. What material is the clamp made from?

The supplied specification identifies the material as 6082 aluminium.

3. Which tube sizes are supported?

The supplied information lists 50 × 2mm, 50 × 3mm, and 50 × 4mm tube configurations. Confirm the actual tube dimensions before ordering.

4. How much does the clamp weigh?

The stated product weight is 0.25kg.

5. Does the product have a specified working load limit?

No working load limit was provided in the supplied specifications. Request the relevant technical documentation before using it in load-bearing or safety-critical applications.

6. Can it be used with any aluminium truss?

No. Compatibility depends on the tube dimensions and the matching claw connection interface. Confirm compatibility with the specific structure system before installation.

7. Is the clamp certified for suspended loads?

Certification and suspended-load approval were not confirmed in the supplied information. Do not assume either without supporting documentation.

8. What should I check before ordering?

Confirm the tube outside diameter, wall thickness, connection geometry, intended application, and any required load or certification documentation.