The DragonStage Custom Offset LED Screen Rear Support Bracket features a round-tube truss clamp, an elongated slotted adjustment arm, a tubular support member, and a square mounting plate with multiple radial slots.
Designed for compatible LED screen rear-support and positioning applications, this bracket provides an alternative connection geometry where a conventional straight or fixed-position mounting bracket may not fit the required installation arrangement.
The slotted arm allows the connection position to be selected within its available adjustment geometry, while the multi-slot mounting plate provides several possible equipment fastening positions.
Suitable for LED screen rental companies, AV installers, event truss equipment suppliers, and custom display-support applications.
Before ordering, confirm the supporting tube diameter, offset dimensions, mounting-hole pattern, intended load direction, and complete connection requirements.
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
Not every LED screen installation uses a simple straight support bracket.
In some event setups, the screen mounting interface and supporting truss tube are positioned at different locations.
This creates a practical problem: a conventional straight connector may not align with both attachment points.
The DragonStage Custom Offset LED Screen Rear Support Bracket uses an offset mounting arrangement to provide another connection option.
The illustrated assembly combines:
A black round-tube clamp
A slotted metal adjustment arm
A hand-operated locking knob
A tubular support member
A square black mounting plate
Multiple radial mounting slots
The truss clamp attaches to a compatible round tubular member.
The offset arm connects the clamp to the support assembly, while the square mounting plate provides a flat connection interface for suitable LED screen rear-support components.
The long adjustment slot allows the relative fastening position to be selected within the actual mechanical limits of the bracket.
This configuration may be useful when the screen and supporting truss do not align with a standard straight connector.
However, the actual adjustment range and permissible loading must be confirmed for the finished assembly.
The defining feature is the offset arrangement between the supporting truss clamp and the equipment mounting plate.
This provides a different connection geometry from a conventional inline LED screen support bracket.
The metal arm includes an elongated mounting slot.
This allows the fastening location to be selected within the available slot length.
The actual travel distance and supported connection positions require dimensional confirmation.
The bracket includes a hinged-style round-tube clamp.
This is intended to connect the assembly to a compatible supporting tube.
The clamp diameter must match the actual tube outside diameter.
A black star-shaped knob is visible near the upper connection.
This forms part of the bracket's fastening or adjustment arrangement.
The correct locking method and required tightening conditions must be confirmed.
The bracket uses a round tubular member connecting the offset arm to the equipment plate.
This separates the truss-side attachment from the plate-side connection.
The square plate features multiple elongated slots arranged around a central opening.
These provide alternative fastener locations within the plate's actual geometry.
The mounting plate must match the intended LED screen connection interface.
The support assembly has a black finish suitable for event equipment installations where a dark-colored connection accessory is preferred.
Specification | Details |
|---|---|
Brand | DragonStage |
Product Type | Custom LED Screen Rear Support Bracket |
Connection Design | Offset / Slotted Arm |
Truss-Side Connection | Hinged Round-Tube Clamp |
Position Adjustment | Elongated Slotted Arm |
Locking Hardware | Star-Shaped Knob |
Main Support Member | Round Tube |
Equipment-Side Connection | Square Multi-Slot Plate |
Mounting Plate Finish | Black |
Overall Finish | Black |
Main Application | Compatible LED Screen Rear Connections |
The product configuration is identified from the supplied photograph. No dimensions, load rating, or specific truss-system compatibility have been established.
Measure the outside diameter of the truss tube where the bracket will be installed.
The clamp must match the actual tube dimensions.
Attach the clamp to the designated position on the compatible supporting tube.
The mounting position must be suitable for the actual application.
The elongated slot provides a selection of connection positions.
Choose the position specified for the intended installation geometry.
The square plate must be connected to a compatible LED screen rear-support interface using appropriate hardware.
All adjustment and fastening components must be secured according to the manufacturer's instructions.
The bracket, clamp, fasteners, truss, screen interface, and supporting structure must be suitable for the intended forces.
The adjustable connection geometry does not independently establish the bracket's permissible load.
Rental companies may require different rear-support accessories depending on the screen system and supporting frame.
This offset bracket may be considered where the mounting interfaces cannot be connected using a conventional straight bracket.
Some LED display arrangements require a connection with a different offset or mounting geometry.
The slotted arm offers positioning flexibility within its confirmed dimensions.
The bracket may be used with a compatible tubular truss support where the complete connection has been verified.
AV installers may use specialized support brackets when working with non-standard mounting locations.
The bracket can be considered as part of a specifically designed support arrangement where the plate and tube connections match the project requirements.
The LED screen rear connection does not align with a straight mounting bracket.
Your supporting structure uses a compatible round tube.
You need an alternative plate-to-clamp connection geometry.
The slotted adjustment arm provides the required attachment position.
The complete mounting arrangement can be verified for the intended application.
Your screen and supporting structure already align with a fixed-position connector.
A simpler compatible bracket may reduce the need for additional adjustment points.
The equipment requires a primary hanging or lifting interface rather than a rear positioning connection.
For a different attachment function, review the Steel LED Video Wall Hanging Hook for Truss Mounting.
This hanging hook is a separate product and cannot be substituted without verifying the complete installation.
Confirm the actual outside diameter of the tube.
Do not assume this bracket fits all 50mm or 60mm truss tubes.
For comparison with a common event truss tube size, see the 50mm Aluminum Single-Tube Truss.
The linked tube is a reference product, not a verified matching support for this bracket.
Confirm:
Hole center spacing
Slot width and length
Fastener diameter
Plate orientation
Available installation clearance
Measure the distance between the intended truss-side and LED-side connection points.
The slot length alone does not establish the complete usable offset range.
The supporting truss or frame must be suitable for the forces transferred by the bracket.
Identify whether the accessory is intended for positioning, lateral restraint, or another specific support function.
These applications may have different loading requirements.
Different LED installation problems require different products.
This product is intended for a compatible rear connection where an offset mounting geometry is required.
If the main problem is screen alignment rather than the connection offset, consider the Adjustable LED Screen Leveling Spacer Block.
For systems requiring a separately specified cable restraint, see the Stainless Steel LED Screen Tightening Cable.
This cable serves a different function and must not be treated as an interchangeable alternative to the bracket.
For buyers comparing attachment interfaces, the Black 48–51mm Aluminum Gripper Clamp provides an example of another round-tube clamping design.
Its tube range and connection specifications must not be assumed applicable to this product.
The number of brackets depends on the actual support layout.
A complete LED screen structure may use several different connection components serving different purposes.
The correct quantity should follow the specified rear connection locations.
For purchasing calculations:
Number of Brackets = Number of Designated Compatible Connection Positions
For example, if an approved support design identifies three locations requiring this exact bracket:
3 connection positions × 1 bracket = 3 brackets
This is a procurement example, not a structural recommendation.
For large LED screens, the number and position of supports must be established through a project-specific technical assessment.
For one compatible rear connection, the main component groups include:
Component |
Configuration |
|---|---|
Offset LED Support Bracket |
1 assembly |
Round-Tube Clamp |
Matching component |
Slotted Adjustment Arm |
Matching component |
Tubular Support Member |
Matching component |
Multi-Slot Mounting Plate |
1 |
Locking and Connection Hardware |
As specified |
Compatible Supporting Structure |
Required |
The final bill of materials must confirm which fastening components are included.
Compatible supporting tube
Matching LED screen mounting interface
Suitable connection fasteners
Verified support arrangement
LED screen leveling accessories
Appropriate restraint components
Alternative clamps
Other mounting bracket configurations
Only add components required by the actual installation.
For a dedicated hanging-interface product, explore the Steel LED Video Wall Hanging Hook.
For screen alignment applications, review the Adjustable LED Screen Leveling Spacer Block.
For suitable systems requiring a cable restraint, see the Stainless Steel LED Screen Tightening Cable.
The 6061 Aluminum Half Coupler provides another tube-attachment design for comparison.
The Black 48–51mm Aluminum Gripper Clamp is another clamp product buyers may compare.
Compatibility Notice: These products have different functions and are not automatically interchangeable with this offset LED support bracket.
The clamp must match the actual tube diameter and permitted mounting location.
The slotted arm must provide the required connection position without compromising the intended fastening arrangement.
The bolts, locking knob, and plate connections must be secured according to the product specification.
The bracket transfers forces into the supporting truss or frame.
The complete structure must be appropriate for the intended application.
The product must not be used as an unverified primary lifting or suspension component.
Outdoor LED walls may be exposed to significant wind forces.
A rear support bracket alone does not establish the safety or stability of the complete LED installation.
Large outdoor LED structures require project-specific engineering consultation.
The required distance between the screen and supporting structure must match the actual bracket geometry.
Check the tube diameter and mounting location.
The mounting-hole pattern and fastener specifications must match.
A rear connection bracket does not automatically replace a manufacturer-approved LED hanging system.
Quantity must follow the actual support layout.
Different support brackets may have different connections, materials, adjustment ranges, and permitted loading.
It is a custom offset LED screen rear support bracket with a truss clamp, slotted adjustment arm, and multi-slot mounting plate.
It uses an offset connection geometry and elongated adjustment slot rather than a simple inline bracket arrangement.
The photograph shows a slotted adjustment arm and locking hardware. The exact adjustment travel must be confirmed.
The visible joints suggest selectable connection positioning, but the permitted angular adjustment range has not been confirmed.
The compatible tube diameter has not been provided and must be confirmed.
The product has a square black plate with multiple radial mounting slots.
No. The mounting-hole dimensions and attachment requirements must match the selected screen interface.
A verified working load limit has not been provided.
Large LED walls require project-specific structural assessment. This bracket must not be selected as the sole basis of the support design.
Please provide the supporting tube diameter, required offset distance, mounting-hole dimensions, intended connection orientation, equipment model, and required quantity.
Need a custom mounting connection between an LED screen rear interface and an event truss support?
The DragonStage Custom Offset LED Screen Rear Support Bracket combines a round-tube clamp, slotted adjustment arm, tubular support member, and square mounting plate.
For a quotation, please provide:
Required quantity
Supporting tube outside diameter
Required connection offset
Mounting plate dimensions and hole pattern
LED screen model or rear connection drawing
Intended mounting orientation
Required loading information
Delivery destination
Contact DragonStage for pricing, dimensional confirmation, and custom support bracket options.