The European Tent Beam Hanging Clamp features an adjustable opposing-jaw design, a threaded tightening mechanism, and an eye-bolt hanging interface for compatible event tent beams and structural profiles.
Designed for a stated 88–110mm (3.46–4.33in) beam-size range, the clamp is marked with an M10×20 threaded connection specification and has a black finish.
Suitable for selected European-style event tent installations, indoor venue lighting arrangements, exhibition structures, and compatible beam-mounted equipment connections.
Before ordering, confirm the actual beam profile, flange dimensions, eye-bolt configuration, permissible loading, and installation orientation.
This product must not be used for overhead equipment suspension without verified load ratings and confirmation of the complete supporting connection.
| sku: | |
|---|---|
| Availability: | |
| Quantity: | |
Dragon Stage
Event lighting is not always installed on round aluminum truss.
In some venues, particularly European-style event tents, exhibition spaces, and indoor halls, the available supporting members may be beams or structural profiles rather than conventional round lighting tubes.
These installations require a different type of mounting clamp.
The DragonStage European Tent Beam Hanging Clamp uses two opposing jaws with a threaded adjustment mechanism to attach to a compatible beam profile.
The product image identifies a beam-size range of 88–110mm (3.46–4.33in).
A threaded mounting interface marked M10×20 is also shown.
One photograph illustrates the clamp assembled with an eye bolt, providing a potential connection point for appropriately specified hanging hardware.
The clamp is intended for buyers who need to connect compatible mounting accessories to suitable tent beams or venue structural members.
It is particularly relevant to event rental businesses, tent equipment suppliers, lighting installers, exhibition contractors, and AV companies.
Unlike a conventional round-tube stage lighting clamp, the BR-142 is intended for a compatible beam-profile connection.
The product is identified for a beam-size range of:
88–110mm / 3.46–4.33in
This makes the clamp relevant to compatible event tent beams and other suitable profiles.
The measurement definition and actual clamping contact surfaces must be verified before purchase.
The bracket features two shaped clamping jaws.
The jaws are positioned on opposite sides of the mounting profile and connected by a threaded adjustment mechanism.
This design differs from circular truss clamps that wrap around a round tube.
A threaded rod allows the clamping-jaw spacing to be adjusted.
The actual clamping range must be confirmed against the selected beam profile.
The fastener must be tightened using the manufacturer's designated installation procedure.
The reference image shows an eye-bolt connection installed on the clamp.
An eye bolt can provide an attachment interface for compatible equipment hardware when the complete assembly is verified for the intended application.
The eye bolt's rated capacity, installation direction, thread engagement, and inclusion in the supplied package must be confirmed.
The product photograph identifies:
M10×20
This is recorded as the supplied connection specification.
The precise interpretation, including the associated fastener length and thread engagement, should be checked against the technical drawing.
The clamp features a black surface finish.
This is useful in installations where exposed mounting equipment should be less visually prominent.
This product is intended for compatible beam profiles rather than conventional round tubes.
For round-tube applications, a different clamp design should be selected.
Specification |
Details |
|---|---|
Brand |
DragonStage |
Product Type |
European Tent Beam Hanging Clamp |
Stated Beam Size |
88–110mm |
Imperial Equivalent |
3.46–4.33in |
Clamping Design |
Opposing-Jaw Adjustable Clamp |
Adjustment Method |
Threaded Rod |
Thread Marking |
M10×20 |
Hanging Interface |
Eye Bolt, as illustrated |
Product Finish |
Black |
Main Applications |
Event Tents, Indoor Venues, Exhibitions, Lighting Mounting |
The BR-142 model, 88–110mm beam dimension, and M10×20 marking are taken from the supplied images. No rated load, material grade, or verified compatibility with a particular tent manufacturer has been established.
Check the actual beam dimensions where the clamp will be installed.
The clamp is listed for an 88–110mm beam-size range, but the relevant measurement must be confirmed.
The clamp jaws are positioned around the designated part of the compatible beam profile.
The jaw shape and contact surfaces must match the beam.
The threaded adjustment mechanism closes the jaws around the beam.
Use the manufacturer's specified fastening procedure.
Where supplied and approved for the intended use, the eye bolt provides an attachment interface.
All additional fasteners and connecting components must be compatible.
The clamp, eye bolt, beam, and connected equipment must be suitable for the intended loading and installation conditions.
Physical fit alone does not establish safe overhead suspension.
Event tents may use structural beams or extruded profiles rather than round lighting truss.
This clamp can be considered where the actual tent beam matches its verified connection geometry and the structure permits the proposed loading.
Indoor venues may have suitable structural profiles available for mounting appropriately selected equipment.
The beam and installation must be reviewed before use.
The clamp may be relevant to exhibition contractors working with compatible beam-based structures.
Certain indoor sports facilities have overhead structural members that may appear suitable for clamping accessories.
However, suspended equipment must only be connected to members and locations verified as suitable for the intended load.
The product may be considered for selected high-bay or industrial lighting applications where the equipment, beam and clamp connection have been verified.
It should not be treated as a universally approved industrial lifting or suspension device.
This is the first decision.
If your installation uses a European-style tent beam or compatible structural profile, a beam clamp may be appropriate.
If it uses a round truss tube, choose a corresponding round-tube clamp instead.
For a different tent mounting design, compare the Black Iron Tent Clamp for Truss Pipe and Canopy Pole Mounting.
This is another type of tent accessory, not a confirmed interchangeable alternative.
The stated size range is 88–110mm.
Before purchasing, measure:
Beam or flange width
Flange thickness
Available jaw engagement depth
Beam profile geometry
Access around the connection location
The clamp must fit the actual supporting profile, not just match one nominal dimension.
Identify what will connect to the clamp.
For an eye-bolt connection, the mating hardware must be appropriate for the selected installation.
Record the equipment weight and loading direction.
A hanging eye bolt does not automatically establish a rated working load for the whole clamp assembly.
Even a correctly sized clamp must be installed on a supporting member suitable for the intended connection and load.
Choose this product when the intended support is a compatible beam profile.
The BR-142 uses an opposing-jaw clamping arrangement.
If the equipment must be attached to a round truss tube instead, consider the Low-Profile Eye Clamp with Eye Bolt.
This is a different mounting design for a different supporting interface.
For suitable round lighting tubes, another option to compare is the Aluminum Stage Lighting Clamp for 38–52mm Round Tubes.
Its product-specific load marking must not be applied to the BR-142 beam clamp.
For a single approved mounting position, the required component groups may include:
Component | Requirement |
|---|---|
BR-142 Beam Clamp | 1 pc |
Eye Bolt | As specified for selected package |
Compatible Supporting Beam | Required |
Appropriate Attachment Hardware | According to application |
Necessary Secondary Retention | Where required |
The standard package contents must be confirmed before ordering.
Correctly matched beam-clamp connection
Verified mounting hardware
Suitable supporting structure
Appropriate installation instructions
Additional mounting clamps
Different attachment hardware
Suitable cable-management equipment
Alternative round-tube mounting solutions
Only select accessories that serve the actual installation.
The required quantity depends on the equipment manufacturer's attachment requirements and the verified installation arrangement.
For example, if an approved mounting design specifies one clamp at each of two independent connection positions, the purchase quantity would be two clamps.
This is a quantity calculation example, not a recommendation that every lighting fixture should use two clamps.
The final number depends on:
Equipment type and weight
Number of designated attachment points
Approved clamp capacity
Beam capacity
Connection orientation
Required restraint arrangement
Do not calculate mounting clamp quantities from fixture count alone.
Explore the Black Iron Tent Clamp for Canopy Pole and Truss Pipe Mounting for another tent-related mounting accessory.
The Black Eye Bolt Half-Coupler for Stage Lighting provides a different tube-mounting interface.
Review the Low-Profile Pro Eye Clamp with Eye Bolt for suitable alternative lighting configurations.
If your installation uses a round truss tube, compare the 100kg Aluminum Stage Light C-Clamp for 35–52mm Tubes.
For buyers selecting their first lighting equipment, read the Event Lighting Buying Guide for Beginners.
For small event planners, the How to Choose Event Lighting Equipment for Weddings, Parties and Small Events guide offers additional equipment-selection information.
Compatibility reminder: These are related products and buying resources. They are not a verified list of interchangeable clamps or approved suspension components.
The opposing jaws must engage the intended beam correctly.
The threaded adjustment mechanism must be secured according to the manufacturer's requirements.
Where an eye bolt is used, its thread engagement, connection orientation, and allowable loading must be verified.
The tent or building beam must be suitable for the additional equipment connection.
Suspension, angled loading, lateral loading, and dynamic forces can create different demands on a clamp.
The supplied product images do not identify a verified working load limit.
The clamp must not be used for overhead equipment suspension until the necessary technical evidence for the complete installation has been established.
Event tent structures may be subject to wind and other environmental actions.
Any additional suspended equipment must be reviewed as part of the complete structure and its permitted loading arrangement.
The 88–110mm dimension must be confirmed against the actual profile and measuring reference.
The clamp geometries are different and must not be treated as interchangeable.
The thread size alone does not establish the allowable load for the complete assembly.
Two beams with similar widths may have different flange shapes or thicknesses.
The beam and its structure must be suitable for the added load.
A similar-looking clamp can have different dimensions, materials, threads, and permitted applications.
It is an adjustable opposing-jaw beam clamp intended for compatible event tent and structural beam mounting applications.
The supplied image identifies an 88–110mm range. The actual measurement definition and beam-profile compatibility require confirmation.
An eye bolt is shown in the product photograph. Its inclusion in the standard package must be confirmed.
It is the threaded connection marking shown in the product image. The corresponding fastener details must be verified.
The product is designed around opposing jaws for a beam profile. Compatibility with a round tube should not be assumed.
It may be suitable for approved tent beam connections where the clamp, supporting structure, and equipment loading have been verified.
Only where the intended structural member and complete mounting arrangement are suitable and approved for the equipment.
A verified working load limit has not yet been provided for this model.
Outdoor applications require review of the supporting structure, environmental conditions, and the complete equipment connection.
Please provide the beam profile drawing or dimensions, required quantity, intended attachment, equipment weight, and installation orientation.
Need a connection accessory for a compatible European-style event tent beam or indoor venue structure?
The BR-142 Adjustable Beam Clamp features an opposing-jaw design, threaded adjustment, black finish, and a pictured eye-bolt attachment interface.
To request a quotation, please provide:
Required quantity
Beam width and profile dimensions
Beam flange thickness
Intended equipment and mounting arrangement
Required eye-bolt or threaded connection
Equipment loading requirements
Delivery destination
Contact DragonStage for pricing, dimensional confirmation, and compatibility review.
For overhead lighting or other suspended equipment, the connection and supporting structure must be technically verified before installation.