100kg Aluminum Stage Light C Clamp for 35-52mm Truss & Event Lighting

• 6061-T6 Aluminum Construction
  Made from Aluminum 6061-T6 according to the supplied specification.

• 100kg Safe Load-Bearing Capacity
  The supplied specification states a maximum safe load-bearing capacity of 100kg.

• 35–52mm Pipe Compatibility
  Designed for compatible round pipes with an outer diameter of 35–52mm.

• Compact 28mm Width
  The stated product width is 28mm, providing a compact mounting profile for stage lighting applications.

• Silver or Black Surface Treatment
  Available with silver polishing or black anodizing.

• Lightweight Construction
  At approximately 0.236kg per unit, the clamp is convenient for handling during stage setup and equipment installation.

• Suitable for Event Lighting
  Designed for compatible stage lighting, truss, concert and event production applications.

The DragonEvent 100kg Aluminum Stage Light C Clamp can be considered for compatible:

• Stage lighting installations

• Concert lighting

• Festival lighting

• DJ and entertainment setups

• Event production

• Theatre lighting

• Performance venues

• Exhibition lighting

• LED stage fixtures

• Tubular truss structures

• Temporary event structures

• Lighting equipment mounting

Its 35–52mm pipe range makes it suitable for applications using compatible round tubular supports.

Compatibility & Installation Notes

Before ordering or installation, confirm that the clamp matches the intended equipment and support structure.

1. Check the pipe diameter
   The supplied specification identifies a suitable round pipe diameter of 35–52mm.

2. Check the fixture connection
   Confirm that the intended lighting fixture or equipment can be securely connected to the clamp.

3. Respect the stated load capacity
   The supplied safe load-bearing capacity is 100kg. Do not exceed the applicable product limit.

4. Check the complete support system
   The clamp's stated capacity should not be treated as the capacity of the supporting pipe, truss, fixture or complete installation.

5. Inspect before use
   Check the clamp and fastening components for visible damage, deformation, excessive wear or other abnormalities before installation.

6. Secure the complete assembly
   Make sure the clamp and fixture are properly secured before the equipment is placed into service.

Safety Considerations

The supplied product information specifies a 100kg safe load-bearing capacity. This rating should be considered together with the actual installation configuration.

The supporting pipe or truss, lighting fixture, fasteners and mounting arrangement must all be suitable for the intended load.

For overhead or structurally significant lighting installations, the complete support system should be reviewed according to the applicable project requirements.

1. What is this aluminum C clamp used for?

It is designed for mounting compatible stage lighting fixtures and equipment to suitable round pipes and tubular truss structures.

2. What material is the clamp made from?

The supplied specification identifies the material as 6061-T6 aluminum.

3. What pipe diameter does it fit?

The specified suitable pipe diameter is 35–52mm.

4. What is the safe load-bearing capacity?

The supplied specification states a safe load-bearing capacity of 100kg.

5. How wide is the clamp?

The product width is 28mm.

6. What surface finishes are available?

The supplied options are silver polishing and black anodizing.

7. How much does one clamp weigh?

The specified product weight is approximately 0.236kg per unit.

8. Is it suitable for stage lighting?

Yes. It is designed as a mounting accessory for compatible stage lighting and event production applications.

9. Can it be used with a 48–50mm truss tube?

Yes. A 48–50mm tube falls within the specified 35–52mm compatible pipe range. The fixture connection and complete installation should still be checked before use.

10. How many pieces are included in one package?

The supplied packaging specification states 45 pieces per box.