The DragonStage Adjustable Aluminum LED Wall Rear Support Bracket features a horizontal telescopic support arm, a hinged round-tube clamp, a hand-operated locking knob, and a black slotted mounting plate.
The product image identifies a 31cm (12.20in) plate-to-clamp reference dimension and a 20cm (7.87in) plate-to-telescopic-joint reference dimension.
Designed for compatible LED screen rear-support connections, rental LED display installations, and event truss support arrangements, the adjustable design allows the mounting geometry to be set within the product's actual telescopic adjustment limits.
The exact adjustment range, clamp diameter, mounting-hole dimensions, allowable loading, and installation orientation must be confirmed before ordering.
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
When installing an LED screen against an event truss or supporting frame, the distance between the screen's rear mounting interface and the supporting structure may vary.
A fixed-length connection bracket works when that distance is already known.
However, some LED screen installations require an adjustable connection so the attachment can be positioned according to the actual structure.
The DragonStage Adjustable LED Wall Rear Support Bracket provides a telescopic mounting arrangement between a slotted plate and a compatible round-tube clamp.
The assembly includes:
A horizontal telescopic support tube
A locking knob for the adjustable section
A hinged round-tube clamp
A flat black mounting plate with multiple radial slots
A clamp fastening assembly
The mounting plate provides an interface for a compatible LED screen rear connection or other designated supporting component.
The round-tube clamp connects to a suitable tube on the supporting structure.
The telescopic section provides positional adjustment between these two interfaces.
This design can be considered for rental LED screens, indoor AV installations, event truss structures, and compatible screen-positioning applications.
The bracket is a connection component, not a complete LED wall structural support system. Its allowable load and permitted function must be verified for the intended installation.
The bracket uses a telescopic tube arrangement.
This allows the distance between the mounting plate and truss clamp to be adjusted within the product's actual operating range.
The minimum and maximum supported connection dimensions must be confirmed from the manufacturing specification.
The product image identifies:
31cm / 310mm / 12.20in
This dimension runs from the mounting plate reference area toward the supporting truss connection.
It should be treated as an illustrated reference dimension rather than a verified maximum adjustment length.
The image also identifies:
20cm / 200mm / 7.87in
This reference extends from the mounting plate area to the telescopic tube transition.
The difference between the two image labels does not establish the product's usable adjustment travel.
A locking knob is located on the upper side of the telescopic tube.
It allows the installer to secure the adjustable section using the designated locking arrangement.
The locking mechanism's allowable force and installation requirements must be confirmed.
The bracket includes a hinged clamp intended to attach to a compatible round tube.
The actual tube diameter and clamp opening range must be checked.
A clamp that physically fits a tube is not automatically suitable for the intended loading.
The plate features elongated mounting slots arranged around the central connection.
The slot pattern provides alternative fastening positions within its actual geometry.
This can be useful when connecting suitable LED screen brackets or supporting interfaces.
The mating hole positions and fastener dimensions must be verified.
The black finish is suitable for equipment installations where the connecting hardware should have a subdued appearance.
Specification | Details |
|---|---|
Brand | DragonStage |
Product Type | Adjustable LED Wall Rear Support Bracket |
Main Material | Aluminum Alloy |
Adjustment Design | Horizontal Telescopic Tube |
Illustrated Dimension A | 310mm / 12.20in |
Illustrated Dimension B | 200mm / 7.87in |
Exact Adjustment Range | To be confirmed |
Upper Locking Mechanism | Hand-operated locking knob |
Truss Connection | Hinged round-tube clamp |
Mounting Interface | Slotted flat plate |
Plate Finish | Black |
Overall Finish | Black |
Clamp Tube Diameter | To be confirmed |
Intended Application | Compatible LED screen rear-support connections |
The 310mm and 200mm measurements are reproduced from the product image as reference dimensions. They do not independently establish a 200–310mm telescopic adjustment range.
The slotted plate connects to a suitable mating interface on the LED screen support assembly.
The mounting holes and fasteners must be compatible.
The clamp attaches to a compatible supporting tube.
The actual outside diameter and clamp geometry must match.
The telescopic tube allows positional adjustment within its confirmed range.
The correct adjustment must be determined from the installation geometry.
The locking knob secures the telescopic section according to the designated assembly method.
The installed bracket, supporting tube, mounting plate, fasteners, and LED screen interface must be suitable for the forces introduced by the intended application.
Rental LED display companies may need adjustable rear connections between their screen equipment and supporting structures.
This bracket may provide a suitable positioning interface where its geometry and loading have been verified.
The telescopic design allows adjustment of the relative position between two compatible mounting interfaces.
The final distance must remain within the specified operating limits.
The bracket may connect a suitable mounting plate to a compatible round truss tube.
The complete supporting truss arrangement must be appropriate for the application.
For selected indoor AV projects, an adjustable rear connection may help align the screen and supporting frame.
The product may be considered where a compatible adjustable connection is required between an equipment mounting interface and a round tubular structure.
Measure the distance between the LED screen's intended rear connection and the supporting tube.
The product image shows 31cm and 20cm reference dimensions.
Before ordering, confirm the minimum and maximum actual connection distances from the product drawing.
The round-tube clamp must match the supporting tube.
Do not assume compatibility with 50mm or 60mm truss tubes until the actual clamp specification is confirmed.
If your installation uses standard event truss, compare the connection requirements with the 50mm Aluminum Single-Tube Truss.
This linked product is a separate tube option, not a verified supporting member for this bracket.
The black mounting plate uses radial elongated slots.
Verify the mounting-hole spacing, fastener dimensions, plate thickness, and mating component before ordering.
Identify whether the bracket is intended for positioning, restraint, or another structural function.
These applications may create different forces.
The bracket must not be used for an unverified structural function.
For larger LED walls, the complete frame, connections, supports, and environmental loading must be assessed as a project.
Choose this product when you require a compatible telescopic rear connection and the appropriate technical specifications are available.
If the primary requirement is alignment between LED screen components, a different accessory may be more suitable.
Explore the Adjustable LED Screen Leveling Spacer Block.
For installations requiring a manufacturer-approved hanging connection, review the Steel LED Video Wall Hanging Hook for Truss Mounting.
A hanging hook and rear support bracket perform different functions.
They are not interchangeable.
If the installation requires a suitable cable restraint arrangement, see the Stainless Steel LED Screen Tightening Cable.
Its selection and use must follow the actual support design and verified component specifications.
The correct quantity depends on the LED screen support design.
For a small compatible installation, the required attachment positions must be identified before deciding how many brackets to purchase.
For example, two rear connection positions would require two matching brackets if the installation design specifically calls for one bracket at each position.
This is a quantity illustration, not a recommended structural arrangement.
The actual number depends on:
LED screen size
Screen and support equipment weight
Supporting frame geometry
Mounting position
Intended load direction
Manufacturer connection requirements
Verified connection capacity
Do not calculate the number of brackets simply by using one bracket per LED cabinet.
For large LED walls or complex temporary structures, request project-specific technical consultation.
For one compatible adjustable rear connection, the principal component groups include:
Component | Configuration |
|---|---|
Adjustable Telescopic Support Arm | 1 assembly |
Round-Tube Clamp | Matching component |
Slotted Mounting Plate | 1 matching component |
Locking Knob | Integrated as illustrated |
Clamp Fastening Hardware | Matched set |
Plate Connection Fasteners | According to equipment interface |
Compatible Supporting Structure | Required |
The exact included hardware must be confirmed before ordering.
Matching LED rear support interface
Compatible round supporting tube
Appropriate connection fasteners
Verified supporting structure
Additional alignment components
Compatible restraint accessories
Alternative tube clamps
Other LED mounting accessories
Additional parts should only be selected when the complete installation requires them.
Adjustable LED Screen Leveling Spacer Block
Useful for comparing alternative LED screen alignment and adjustment accessories.
Steel LED Video Wall Hanging Hook
A separate product for suitable LED hanging-interface applications.
Stainless Steel LED Screen Tightening Cable
A related cable accessory for appropriately specified LED support arrangements.
Black 48–51mm Aluminum Gripper Clamp
An alternative clamp design for comparing tube attachment interfaces.
6061 Aluminum Half Coupler for Event Truss
A different clamping accessory that may help buyers compare connection methods.
Compatibility Reminder: These are related products, not a verified list of interchangeable parts.
The 31cm and 20cm labels in the product image are reference dimensions.
Confirm the actual minimum and maximum installed lengths before use.
The clamp must fit the supporting tube and be installed using its designated fastening method.
The plate slots and fasteners must match the intended supporting interface.
The telescopic locking mechanism must be suitable for the intended connection function.
The bracket must not be assumed to resist arbitrary rotation, sliding, compression, or tension without appropriate verification.
Any force introduced through the brace also acts on the clamp, plate, fasteners, and supporting structure.
The product must not be used as a lifting point or primary suspended-load connection without the required product-specific verification.
Outdoor LED screens can be subject to significant wind loads.
This accessory alone does not establish the stability or wind resistance of an LED screen structure.
The image identifies 31cm and 20cm reference dimensions, not necessarily the two end positions of the telescopic adjustment.
The actual clamp opening and tube diameter must match.
The plate slots must correspond to the actual mating connection.
An adjustable bracket should not automatically be treated as a load-rated compression brace, tension rod, or lifting connector.
The quantity must follow the actual connection arrangement.
Different rear support brackets may have different adjustment ranges, mounting plates, clamps, and load conditions.
It is an adjustable rear support connection accessory for compatible LED screen and event truss support arrangements.
They are two reference dimensions shown in the product photograph. The exact measurement points and telescopic adjustment range should be confirmed from a technical drawing.
Yes. The image shows a telescopic support tube with a locking knob.
The bracket has a hinged round-tube clamp.
The compatible tube diameter has not yet been confirmed for this product.
No. Compatibility depends on the mounting-hole pattern, fasteners, and intended supporting interface.
The product is identified as an aluminum alloy adjustable support bracket. The exact material specifications of its individual components require confirmation.
A verified rated load capacity has not been supplied.
Large outdoor LED wall installations require a complete project-specific structural and environmental loading assessment.
Please provide the required connection distance, supporting tube diameter, LED screen interface dimensions, mounting orientation, quantity, and intended loading function.
Need an adjustable connection between an LED screen rear mounting interface and a compatible supporting truss tube?
The DragonStage Adjustable LED Wall Rear Support Bracket features a telescopic support arm, a black slotted mounting plate, and a hinged round-tube clamp.
To request a quotation, please provide:
Required quantity
Supporting tube diameter
Required connection distance
LED screen model or mounting-interface details
Mounting plate dimensions and fastener requirements
Intended connection orientation
Delivery destination
Contact DragonStage for pricing, dimensional confirmation, and compatibility review.
For larger LED walls or structurally significant installations, provide the complete support requirements for project-specific technical assessment.