The DragonStage Adjustable Angle LED Wall Rear Support Brace features a telescopic support arm with a stated 35–50cm (13.78–19.69in) adjustment range, a pivoting mounting connection, a hinged round-tube clamp, and a rectangular slotted mounting plate.
Designed for compatible LED screen rear-support and positioning arrangements, this bracket allows the connection length and mounting angle to be selected according to the actual screen and supporting-frame geometry.
The black telescopic body includes a hand-operated locking knob, while the pivoting connection provides an alternative to fixed-angle LED wall support brackets.
Suitable for LED screen rental companies, AV installers, event equipment suppliers, and customers requiring adjustable rear connections.
Before ordering, confirm the clamp diameter, mounting-hole dimensions, usable adjustment range, permitted angle positions, and allowable loading.
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
When installing an LED screen against a supporting truss or frame, two dimensions can affect the connection.
The first is the distance between the screen and the supporting structure.
The second is the angle at which the connecting bracket meets the mounting interface.
A fixed-length bracket may be suitable when both dimensions are already known.
However, certain LED screen installations require an adjustable connection to accommodate the actual mounting geometry.
The DragonStage Adjustable Angle LED Wall Rear Support Brace combines a telescopic support arm with a pivoting mounting connection.
The product has a stated adjustable length of:
350–500mm / 13.78–19.69in
The assembly includes:
Black telescopic support tube
Hand-operated length-locking knob
Pivoting mounting connection
Rectangular slotted connection plate
Hinged round-tube clamp
Mechanical fastening components
The clamp is intended for a compatible round tube on the supporting structure.
The mounting plate provides a connection interface for a suitable LED screen rear-support component.
The pivoting section allows the bracket angle to be configured within its actual mechanical limits.
This design can be useful where the connection distance or relative mounting angle differs from a fixed bracket arrangement.
The bracket must be selected according to the actual mounting geometry and verified connection requirements.
The stated telescopic range is:
Minimum length: 350mm / 13.78in
Maximum length: 500mm / 19.69in
Adjustment difference: 150mm / 5.91in
The telescopic design provides length adjustment within the specified range.
The exact measurement reference points should be confirmed before purchase.
The reference image shows a pivoting connection at the mounting end of the support arm.
This allows the bracket geometry to accommodate a suitable angular connection arrangement.
The actual angular adjustment range and locking method must be confirmed.
The opposite end features a black hinged clamp.
This is intended to connect the brace to a compatible round tube.
The actual clamp opening and supported tube diameter have not yet been confirmed.
A star-shaped locking knob is positioned on the telescopic body.
The knob is used to secure the selected extension according to the product's fastening design.
The locking mechanism must be appropriate for the intended forces.
The end plate features four elongated mounting slots.
These offer possible fastening positions within the actual slot geometry.
The plate must match the hole pattern and fastening requirements of the intended equipment interface.
The support arm, mounting plate, and clamp assembly have a black appearance.
This is suitable for event installations where exposed support components should have a subdued appearance.
When a fixed bracket cannot accommodate the required connection geometry, a pivoting telescopic design may provide another option.
The correct choice depends on the available mounting dimensions and verified loading conditions.
Specification | Details |
|---|---|
Brand | DragonStage |
Product Type | Adjustable LED Wall Rear Support Brace |
Stated Adjustable Length | 350–500mm |
Imperial Equivalent | 13.78–19.69in |
Adjustment Difference | 150mm / 5.91in |
Length Adjustment | Telescopic Tube |
Angle Adjustment | Pivoting Connection |
Locking Mechanism | Hand-Operated Star Knob |
Tube Connection | Hinged Round-Tube Clamp |
Opposite Connection | Rectangular Slotted Mounting Plate |
Visible Plate Slots | 4 |
Product Finish | Black |
Intended Application | Compatible LED Screen Rear-Support Connections |
The 35–50cm adjustable length comes from the supplied product specification. The telescopic tube, locking knob, hinged clamp, pivoting connection, and slotted plate are visible in the product photograph.
The hinged clamp connects to a compatible supporting tube.
Confirm the tube diameter and clamp geometry before installation.
The rectangular plate is connected to the designated LED screen support interface using suitable fasteners.
The slot dimensions and mounting pattern must match.
Adjust the telescopic arm within the confirmed 35–50cm range.
The required dimension depends on the actual screen-to-support geometry.
Position the pivoting connection according to the intended installation geometry.
The permitted angle and required locking arrangement must follow the manufacturer's specification.
Tighten the designated locking and fastening components according to the product instructions.
The brace, truss clamp, mounting plate, fasteners, LED screen interface, and supporting structure must be suitable for the intended loads.
The presence of adjustable joints does not establish that the assembly is suitable for arbitrary tension, compression, bending, or suspension loads.
The brace can be considered where a rental LED screen requires a compatible adjustable connection to its supporting frame.
The telescopic arm allows adjustment of the connection distance.
The pivoting connection adds another geometric adjustment for suitable mounting arrangements.
The round-tube clamp may connect to a suitable event truss member when the clamp and supporting structure are compatible.
The bracket may be considered for suitable indoor LED display support arrangements requiring adjustable rear connections.
For customized LED support configurations, the adjustable connection may be useful where a fixed-length or fixed-angle component cannot match the mounting geometry.
Large or structurally significant LED installations require project-specific engineering review.
The stated adjustment range is:
350–500mm
Measure the actual distance between the intended screen-side and support-side attachment references.
Confirm that the bracket can accommodate the required dimension within its usable range.
If both interfaces align in a fixed arrangement, a simpler bracket may be sufficient.
If the mounting geometry requires an angular connection, this pivoting version may be more appropriate.
The actual supported angles must be confirmed.
The clamp must match the round-tube diameter.
Do not assume the product fits 50mm or 60mm tubes without checking the selected clamp specification.
For buyers comparing suitable round-tube connection products, see the 50mm Aluminum Single-Tube Truss.
This is a related tube product, not a verified support structure for the present brace.
Measure:
Hole center spacing
Slot dimensions
Required fastener size
Plate orientation
Available mounting clearance
Do not assume that the plate fits every LED screen cabinet.
Determine whether the installed bracket is used for positioning, restraint, or a load-bearing support function.
Each application requires appropriate technical verification.
Different LED screen mounting accessories solve different installation problems.
Choose this product when a compatible installation requires both telescopic length adjustment and an adjustable connection angle.
If the main requirement is aligning or leveling the screen components, a different accessory may be more suitable.
Explore the Adjustable LED Screen Leveling Spacer Block.
If the installation requires a designated LED hanging interface, compare the Steel LED Video Wall Hanging Hook for Truss Mounting.
A hanging hook performs a different function from an adjustable rear support brace.
Where a verified support design specifies a cable-based restraint accessory, the Stainless Steel LED Screen Tightening Cable may be relevant.
The cable and the adjustable brace must not be treated as interchangeable components.
The required quantity depends on the actual LED screen support arrangement.
It cannot be established from the number of LED panels alone.
For procurement planning, use:
Required Quantity = Number of Designated Compatible Connection Positions
For example, if a verified mounting plan specifies four adjustable rear-brace positions:
4 connection positions × 1 brace = 4 braces
This is a purchasing calculation example, not a recommendation that four braces will support a particular LED wall.
The final quantity and positions must follow the screen manufacturer's mounting requirements and the complete support design.
For one designated adjustable rear connection, the principal component groups are:
Component | Configuration |
|---|---|
Telescopic Rear Support Arm | 1 assembly |
Pivoting Connection | Integrated assembly |
Round-Tube Clamp | 1 matching connection |
Rectangular Mounting Plate | 1 matching plate |
Length-Locking Knob | Integrated component |
Connection Fasteners | According to supplied specification |
Compatible Supporting Structure | Required |
The exact included hardware must be confirmed before ordering.
Compatible supporting tube
Matching LED screen rear interface
Correct fasteners
Verified support arrangement
Appropriate installation instructions
Additional LED screen alignment accessories
Suitable restraint components
Alternative mounting clamps
Different support-brace configurations
Only purchase additional accessories where the installation requires them.
The Adjustable LED Screen Leveling Spacer Block addresses a different screen-alignment requirement.
The Steel LED Video Wall Hanging Hook is a separate hanging-interface product.
The Stainless Steel LED Screen Tightening Cable is another accessory to evaluate where the approved support design requires it.
For a different clamp design, explore the Black 48–51mm Aluminum Gripper Clamp.
Its tube-size range and connection function differ from those of the present brace.
The 6061 Aluminum Half Coupler for Event Truss provides another tube-mounting design for comparison.
The 50mm Clamp Locking Fastener for 48–52mm Tubes can help buyers compare alternative fastening arrangements.
Compatibility Reminder: These are related products and alternative solutions, not a verified list of interchangeable accessories.
The specified 35–50cm range must be confirmed against the exact measurement points in the manufacturing drawing.
The joint must be secured according to the designated installation procedure.
Do not assume it can be adjusted while carrying a load.
Confirm the actual supported tube diameter and complete connection geometry.
The mounting plate must align with the designated connection points.
No verified working load limit has been provided.
Do not assume that the brace is suitable for any arbitrary compression, tension, shear, or bending force.
This bracket is not automatically suitable as a primary suspension or lifting component.
Outdoor LED screen structures may experience significant wind loads.
The support configuration must be assessed as a complete project, including the screen, supporting frame, connection points, and environmental loading.
The length is important, but the mounting angle, tube diameter, and plate geometry must also match.
The supporting tube outside diameter and connection position must be verified.
The actual permitted angle range and connection capacity must be confirmed.
Rear positioning or restraint components do not automatically replace primary LED screen suspension hardware.
The required number of braces must follow the complete support arrangement.
Different products can have different extension lengths, plate geometries, clamps, pivots, and allowable forces.
The stated adjustment range is 35–50cm (350–500mm).
The product image shows a pivoting mounting connection. The actual permitted angle range and locking method must be confirmed.
Yes. A hand-operated star knob is visible on the telescopic body.
It features a hinged round-tube clamp.
The supported tube diameter has not yet been confirmed.
The rectangular plate has four elongated mounting slots, allowing selected fastener positions within its actual geometry.
No. The plate interface, mounting positions, load requirements, and complete support arrangement must be compatible.
A verified working load limit has not been supplied.
Large LED wall installations require project-specific structural and connection verification.
Please provide the required connection distance, supporting tube diameter, mounting-hole dimensions, intended angle, installation orientation, quantity, and supporting structure details.
Need a rear connection that provides both adjustable length and a pivoting mounting interface?
The DragonStage Adjustable Angle LED Wall Rear Support Brace combines a telescopic support arm, locking knob, rectangular mounting plate, and hinged round-tube clamp.
For an accurate quotation, please provide:
Required quantity
Supporting tube outside diameter
Required connection length
Mounting-hole dimensions
Required installation angle
Intended support or restraint function
LED screen model or mounting-interface drawing
Delivery destination
Contact DragonStage for pricing, dimensional confirmation, and compatibility review.
For large LED walls and structurally significant installations, request a project-specific technical assessment.