The DragonStage Foot-Operated Stage Lifting Caster is a mechanical lifting wheel assembly designed to help reposition compatible mobile stage and truss structures.
Featuring a foot-operated lever mechanism, swivel caster wheel, wheel brake, L-shaped mounting bracket, and two aluminum tube clamps, the assembly provides a practical lifting-and-rolling accessory for suitable event equipment systems.
The pedal mechanism is designed to engage the wheel assembly for repositioning operations, subject to the confirmed lifting travel, rated capacity, and supporting structure.
Ideal for event rental companies, stage installers, AV crews, and equipment manufacturers developing mobile stage or truss configurations.
Important: The complete caster assembly capacity, required quantity, compatible tube diameter, and lifting stroke must be verified before purchase. Individual clamp ratings do not establish the rated capacity of the complete mechanism.
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
Moving a stage or truss structure can be time-consuming when the equipment is already assembled.
For event rental companies, a common operational challenge is repositioning equipment without completely dismantling it.
A foot-operated lifting caster offers a mechanical wheel-engagement solution for compatible structures designed to accommodate this type of accessory.
The DragonStage Foot-Operated Stage Lifting Caster features a metal mounting bracket connected to two aluminum tube clamps.
The opposite side of the assembly includes a foot-operated lever mechanism and a swivel caster wheel.
When correctly installed on a suitable structure, the mechanism is intended to allow the operator to use foot pressure to engage the lifting wheel for a controlled repositioning operation.
The exact lifting sequence, lifting height, wheel retraction behavior, and load limits depend on the actual product design.
Unlike a conventional stage leg with a wheel permanently attached to its base, this product uses a separate mechanical lifting assembly.
It is intended for equipment manufacturers, rental companies, and stage installers who require a specialized mobile support accessory.
The assembly includes a mechanical foot lever.
This arrangement allows the user to operate the lifting mechanism using foot pressure rather than lifting the equipment entirely by hand.
The actual lifting travel, required operating force, and engagement positions must be confirmed for the finished model.
The mounting assembly features two aluminum clamps attached to a common bracket.
The dual-clamp arrangement provides two attachment positions on a compatible supporting structure.
The actual clamp tube diameter, spacing, orientation, and allowable forces must be confirmed.
The product features a swivel caster intended to facilitate changes in rolling direction.
This can be useful when repositioning compatible equipment within an indoor event venue or assembly area.
The wheel's permissible load, rolling surface requirements, and turning clearance must be established before use.
The photograph shows a brake component attached to the caster.
The brake is intended to control wheel movement according to its design.
The brake must not be assumed to replace the supporting structure's required stability or immobilization measures.
The assembly includes a metal L-shaped bracket connecting the wheel mechanism to the two tube clamps.
The final bracket geometry must match the supporting structure.
The illustrated mechanism uses multiple metal lever components connected by bolts and pivot points.
The foot pedal includes orange-colored contact components.
This distinguishes the lifting caster from a conventional fixed caster mounted directly beneath a stage leg.
For suitable stage or truss systems, a separate lifting caster may offer an alternative to replacing every existing support leg with a wheeled version.
However, the complete structure must be verified for the modified load paths during movement.
Specification | Details |
|---|---|
Brand | DragonStage |
Product Type | Foot-Operated Stage Lifting Caster |
Main Function | Mechanical Lifting and Repositioning |
Operation Method | Foot Pedal / Lever |
Wheel Type | Swivel Caster |
Wheel Brake | Included in illustrated assembly |
Mounting System | Dual Tube Clamps |
Clamp Material | Aluminum Alloy, as identified |
Mounting Bracket | L-Shaped Metal Bracket |
Lever Mechanism | Mechanical Pivot Assembly |
Wheel Color | Black with Light-Colored Hub |
Pedal Contact Color | Orange |
Mounting Orientation | Subject to confirmed configuration |
Suitable Equipment | Compatible stage and truss structures |
Technical note: The visible SWL markings on individual clamps do not establish the permissible load of the entire lifting caster assembly. The caster, lifting lever, bracket, connections, and host structure must be assessed together.
The dual-clamp bracket is connected to the specified positions on a compatible supporting structure.
The clamps must match the actual tube diameter and mounting geometry.
Before operating the lifting mechanism, verify that the caster can move through its intended travel without interfering with other structural components.
The foot-operated lever is used to engage the lifting mechanism according to its designated operating procedure.
The mechanism is intended to help raise or transfer the supported equipment onto the caster for repositioning.
The actual lifting stroke and locking positions must be confirmed.
Where the equipment is designed and verified for mobility, the caster assembly can facilitate movement across a suitable floor.
The complete structure must remain stable throughout the movement.
After repositioning, the structure must be returned to its verified stationary support arrangement.
The caster's wheel brake alone should not be treated as a substitute for a properly supported stationary stage or truss structure.
The lifting caster may be considered for compatible mobile stage configurations that require controlled repositioning.
The stage must be specifically suitable for movement using the selected caster arrangement.
Rental companies may use lifting caster systems where repeated equipment repositioning is part of their operating workflow.
The dual tube-clamp arrangement may be relevant to compatible truss-based structures.
Compatibility depends on tube geometry, clamp spacing, attachment orientation, and complete loading conditions.
The assembly may be useful in suitable indoor environments with a sufficiently level and appropriate rolling surface.
Stage and event equipment manufacturers may consider this caster as part of a specially designed mobile equipment system.
Your equipment has a compatible supporting structure.
You need a mechanical lifting-and-rolling accessory.
Your application requires temporary repositioning.
The complete assembly has been verified for the equipment and load.
You want a separate mobility mechanism rather than permanent wheels under every leg.
Your requirement is simply to use stage legs fitted with integrated wheels.
For example, DragonEvent offers Stage Legs with Silent 3-Inch Castors for Quick Stage Systems.
That product is a different wheel-equipped support design and is not automatically interchangeable with this foot-operated lifting caster.
The stage will remain stationary during normal use and does not require a lifting caster system.
For a conventional supported platform, consider Fixed-Height Aluminum Quick-Lock Stage Legs with Adjustable Swivel Feet.
This is a stationary support product, not a lifting-wheel replacement.
The two aluminum clamps must match the actual outside diameter of the supporting tubes.
A nominal truss model is not enough to establish compatibility.
The two clamps must align correctly with the intended structure.
Before ordering, confirm the spacing between the attachment locations.
The lifting caster must be installed in the orientation specified for the complete mechanism.
The assembly must have adequate clearance for wheel rotation, steering, and lifting travel.
The intended stage or truss structure must be suitable for the loads transferred through the caster assembly during lifting and rolling.
A clamp that physically fits the supporting tube does not establish structural compatibility.
The required quantity depends on the supporting structure and its verified mobility design.
It cannot be calculated from stage dimensions alone.
For example, if a manufacturer-approved mobile structure uses four identical lifting caster positions, the purchasing quantity would be:
4 mounting positions × 1 lifting caster = 4 assemblies
This is an inventory example, not a recommendation that four casters are sufficient for every stage.
The required number depends on:
Total equipment weight
Center of gravity
Caster placement
Load distribution
Lifting and rolling forces
Structural connection capacity
Intended movement conditions
The complete mobility system must be evaluated before the caster quantity and locations are finalized.
For one specified mounting position, the principal component groups are:
Component | Configuration |
|---|---|
Foot-Operated Lifting Mechanism | 1 assembly |
Swivel Caster Wheel | 1 |
Wheel Brake | Matching component |
Dual Tube-Clamp Assembly | 1 matched set |
L-Shaped Mounting Bracket | 1 |
Required Fasteners | As specified |
Compatible Supporting Structure | Required |
The exact included hardware and component specifications should be confirmed in the quotation.
Compatible supporting structure
Matching clamp connections
Appropriate mounting hardware
Confirmed lifting and rolling capacity
Suitable operating floor
Conventional wheeled stage legs
Fixed stage legs with leveling feet
Replacement caster components
Alternative stage mobility systems
Additional accessories should be selected according to the actual equipment arrangement.
For systems designed to use integrated leg-mounted wheels, explore Stage Legs with Silent 3-Inch Castors.
These are an alternative mobility solution, not the same lifting mechanism.
For stationary platforms requiring height adjustment, see 50×50×3mm Telescopic Quick-Lock Stage Legs with Adjustable Feet.
For standard fixed-height support configurations, explore 50×50×3mm Fixed-Height Quick-Lock Stage Legs.
For stage installations requiring floor contact adjustment rather than rolling movement, review Fixed-Height Stage Legs with Adjustable Swivel Feet.
If the primary concern is the attachment interface, the 6061 Aluminum Half Coupler for Event Truss provides a reference to another tube-clamp design.
Its specifications and load ratings must not be applied to the present lifting caster assembly.
For a different connection style, see Heavy-Duty 6061 Aluminum Truss Clamp.
This is not a verified replacement for the dual-clamp mounting bracket.
The caster wheel, mechanical lever, pivot connections, bracket, and clamps must be suitable for the specified loads.
Before movement, the foot lever and related components should operate correctly according to the product instructions.
The brake should be checked as part of the movement procedure.
It should not be treated as a replacement for a stable stationary support arrangement.
Floor unevenness, gaps, slopes, and surface condition can affect the movement of wheeled equipment.
Do not use this system to move an occupied stage unless the complete system has been specifically designed and verified for that operation.
The supporting stage or truss must be suitable for both the temporary lifted condition and the subsequent rolling movement.
A visible rating on one clamp does not independently establish the load rating of the lifting caster.
A lifting caster is a mechanical system, not just a wheel.
The lifting lever, support bracket, clamps, and complete rated capacity are equally important.
The tube diameter, tube spacing, and available mounting position must match the attachment assembly.
Two clamps with individual load markings do not automatically create a lifting bracket with twice the allowable capacity.
The brake is one component of the caster system.
The complete stationary arrangement must still be appropriate.
The number and positions of lifting casters must follow the verified equipment configuration.
Not every stage or truss structure is designed to be moved after assembly.
It is a mechanical wheel assembly that uses a foot lever to assist lifting and repositioning compatible equipment.
Yes. The illustrated product includes a swivel caster wheel.
The photograph shows a brake mechanism attached to the caster.
The illustrated assembly uses two aluminum tube clamps mounted to an L-shaped bracket.
The actual compatible tube diameter has not yet been confirmed.
The exact lifting stroke has not been supplied.
A verified rated capacity for the complete lifting caster assembly has not been provided.
Only if the stage structure and mounting arrangement have been verified as compatible with the lifting caster system.
The quantity depends on the complete mobility design, equipment weight, load distribution, and required support arrangement.
Suitability depends on the equipment design, ground conditions, and intended operating environment. Outdoor use has not been established for this product.
Need a mechanical mobility accessory for a compatible stage or truss-based event structure?
The DragonStage Foot-Operated Stage Lifting Caster combines a swivel caster, foot-operated lifting mechanism, L-shaped mounting bracket, and dual aluminum tube clamps.
To request a quotation, please provide:
Required quantity
Supporting truss or stage model
Tube outside diameter and attachment spacing
Total equipment weight
Required lifting travel
Intended movement conditions
Delivery destination
Contact DragonStage for pricing, product dimensions, mounting compatibility, and available configurations.