loading
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
The Portable Round Tower DJ Truss is a compact modular truss system designed for DJ booths, clubs, touring productions, exhibitions, and portable event setups.
The supplied product information identifies this system as a portable DJ truss stand using aluminum alloy 6082-T6 and a high-precision spigot connection. The cylindrical tower configuration provides a distinctive alternative to conventional square truss structures while allowing the system to be assembled and transported in sections.
For DJ and entertainment applications where portability and visual presentation are important, the round tower truss can be configured as a standalone vertical support or incorporated into a broader event production layout.
The supplied DJ truss table specification is:
Length: 1.5m × Width: 0.5m × Height: 0.9m
The source information also identifies compatible truss sections of 200mm / 289mm and available section lengths of 1m / 2m / 3m.
The Portable Round Tower DJ Truss is designed for applications where the structure needs to be assembled, disassembled, transported, and reused.
This makes it suitable for:
Mobile DJs
Clubs
Touring entertainment
Event production
Exhibitions
Trade shows
Portable display structures
The cylindrical tower configuration creates a modern visual appearance for DJ and entertainment environments.
Compared with a conventional square truss appearance, the round tower format can provide a more distinctive presentation for clubs, DJ booths, and branded event spaces.
The supplied product specification identifies Aluminum Alloy 6082-T6 as the material.
This aluminum alloy is used for the truss structure while maintaining the lightweight characteristics required for a portable system.
The system uses a spigot truss connection.
The supplied information describes the connection as a high-precision spigot connection, allowing individual truss sections to be connected into the required tower configuration.
The truss is supplied in modular sections with listed lengths of:
1m
2m
3m
This section-based design facilitates transportation and allows the tower configuration to be adapted to the project requirements.
Specification | Details |
|---|---|
Brand | Dragon Stage |
Product Name | Portable Round Tower DJ Truss |
Model Number | |
Product Type | |
Key Word | Tower DJ Truss |
Feature | Portable DJ Truss |
Material | Aluminum Alloy 6082-T6 |
Truss Section | 200mm / 289mm |
Available Section Length | 1m / 2m / 3m |
Connection | Spigot Connection |
Main Application | Tower Portable DJ Truss |
Application | Round DJ Truss |
Place of Origin | Guangdong, China |
Selling Unit | Set |
The compact portable structure is particularly suitable for DJ setups where a professional truss framework is required around or above the performance area.
The round tower appearance works well in club environments where lighting and visual presentation are important.
The tower can be used as part of a modular event production structure.
For concert and event applications, explore Concert & Event Solutions.
The modular structure can also be used for displays, branding, and exhibition lighting.
Explore Exhibition Booth Solutions for related modular display applications.
Because the structure can be separated into modular truss sections, it is suitable for production teams that repeatedly assemble and transport their equipment.
A major advantage of this system is its modular construction.
Instead of transporting a complete tower as one large structure, the truss can be separated into individual sections.
This can help with:
Transportation
Storage
Repeated event deployment
Rental operations
Touring production
Exhibition setup
The supplied information specifically describes the system as designed for portable DJ truss applications.
The supplied source describes the tower as a vertical support for entertainment applications and references suspended moving-head lighting and LED/video lighting.
Potential applications include:
LED lighting
Display lighting
DJ equipment support
Event branding components
Important: The supplied information does not provide a numerical load capacity for the Portable Round Tower DJ Truss. Therefore, no specific maximum load should be assumed from this product page. The allowable load should be confirmed according to the exact tower configuration and engineering data.
The supplied FAQ states that the round tower truss can be used for small outdoor events, but additional engineering considerations are required.
For outdoor applications, the source recommends adding appropriate ballast to the base to counteract wind loads and following the applicable engineering and safety requirements.
Outdoor use should therefore not be treated as equivalent to indoor use.
A typical modular assembly process is:
Position the appropriate base or support system on a suitable surface.
Join the truss sections using the spigot connection system.
Assemble the required 1m, 2m, or 3m truss sections into the desired tower configuration.
Ensure the spigot connections and associated connection components are correctly installed.
Mount compatible lighting, display, or DJ-related equipment according to the design requirements.
Check all connection points and structural components before operating the system.
For repeated installation, the supplied information recommends following the appropriate installation methodology and inspecting the connectors for wear before each use.
The modular section design is intended to simplify transportation.
The supplied information recommends using suitable flightcases to protect the truss sections and reduce surface scratches during transportation and storage.
For touring and rental applications, individual truss components can be organized according to their section lengths and project requirements.
According to the supplied product information:
Packaging Information | Details |
|---|---|
Selling Unit | Set |
Gross Weight | Depends on configuration |
Packing Size | Depends on configuration |
Package Type | Bubble film or other package |
Lead Time | To be negotiated |
The supplied information lists:
Item | Quantity |
|---|---|
CL30 / CL20 | Depends |
Plywood Board | 1 pc |
Because the packing configuration depends on the actual order, the final packing list should be confirmed before shipment.
The specified 1.5m × 0.5m × 0.9m DJ truss table configuration is suitable for space-conscious entertainment setups.
The modular truss sections can be assembled and disassembled for transportation.
The round tower structure creates a distinctive visual profile for DJ and club environments.
The aluminum alloy construction supports the portable design requirements of event production.
The spigot connection system allows the tower to be assembled from individual truss sections.
The available 1m / 2m / 3m sections provide flexibility for transportation and configuration.
It is designed for portable DJ, club, entertainment, event, exhibition, and truss-based display applications.
The supplied specification identifies Aluminum Alloy 6082-T6.
The supplied information lists 200mm and 289mm truss sections.
The listed section lengths are:
1m, 2m, and 3m.
It uses a spigot truss connection system.
The supplied DJ truss table specification is:
1.5m long × 0.5m wide × 0.9m high.
Yes, the supplied information states that it can be used for small outdoor events, but appropriate ballast and engineering measures are required to address wind loads.
A specific numerical load capacity is not provided in the supplied product information. The appropriate load rating should be confirmed for the exact configuration.
The supplied product description references suspended moving head lights as an intended application. The actual allowable fixture load must be confirmed from the relevant engineering data.
The supplied information recommends storing the components in a dry environment and using suitable flightcases to reduce scratches and protect the truss during transportation.
Looking for a portable truss system for your DJ booth, club, event, or touring production?
The Dragonstage Portable Round Tower DJ Truss combines 6082-T6 aluminum construction, modular truss sections, and spigot connections in a portable format.
Send us your required tower size, truss section, quantity, application, and lighting/equipment requirements to confirm the suitable configuration.
