loading
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
The Aluminum BOOM ARM Truss Extension Tube with Dual Welded Clamps 1.5m is a practical aluminum truss accessory designed to provide an extended mounting position on compatible F32, F33, and F34 truss systems.
With a 1.5m extension length and dual welded clamps, the boom arm can be attached to a compatible truss to create an additional projection point for stage lighting, event equipment, displays, and other suitable accessories.
The welded clamp design provides an integrated connection between the extension tube and the truss attachment points, helping simplify installation while maintaining a compact and professional appearance.
Designed for common truss systems, this 1.5m aluminum boom arm is suitable for stage production, concerts, exhibitions, events, and other applications where equipment needs to be positioned away from the main truss structure.
The boom arm provides a 1.5m extension length, creating an additional mounting position away from the main truss.
This can be useful when equipment or lighting fixtures need to be positioned outside the normal truss profile.
The product features two welded clamps integrated with the boom arm.
The dual-clamp configuration provides two attachment points between the extension tube and the compatible truss system.
The boom arm is made from aluminum, providing a lightweight accessory solution for compatible truss systems.
The supplied product information identifies the boom arm for:
F32 Truss
F33 Truss
F34 Truss
It is therefore suitable for compatible common truss systems using these truss configurations.
The extension tube can create an additional mounting location for equipment that cannot conveniently be positioned directly on the main truss.
Potential applications include:
Event equipment
Exhibition displays
Promotional structures
Performance equipment
Decorative elements
Specification | Details |
|---|---|
Product Name | Aluminum BOOM ARM Truss Extension Tube |
Product Type | Truss Extension / Boom Arm |
Material | Aluminum |
Extension Length | 1.5 m |
Clamp Type | Dual Welded Clamps |
Clamp Quantity | 2 |
Compatible Truss | F32 / F33 / F34 |
Application | Common Truss Systems |
Main Use | Truss Extension / Equipment Mounting |
Installation | Clamp Connection |
One of the most practical applications for a boom arm is stage lighting.
The extension can provide additional fixture positions where direct mounting on the main truss is not sufficient.
Typical uses include:
Front lighting
Side lighting
Stage lighting extensions
Concert lighting
Performance lighting
Event production
The actual allowable fixture load depends on the complete truss and boom arm configuration. No load rating is provided in the supplied information.
The 1.5m boom arm is suitable for compatible event truss systems where additional equipment positions are required.
It can be incorporated into:
Concert structures
Stage production
Event truss
Performance structures
Corporate events
Temporary event installations
For professional rigging applications, the complete structure should be checked before loading the extension tube.
For complete truss solutions, explore Dragonstage Truss & Rigging.
The boom arm can also be used with compatible exhibition truss systems to create extended positions for:
Display lighting
Signage
Promotional elements
Decorative components
Exhibition accessories
For exhibition booth structures, explore Exhibition Booth Solutions.
A typical installation concept is:
Confirm that the existing structure uses a compatible F32, F33, or F34 truss.
Place the 1.5m extension tube at the required location on the truss.
Position both welded clamps correctly around the compatible truss members.
Install and tighten the applicable connection hardware.
Verify that the boom arm is correctly positioned and that both clamp connection points are secure.
Attach the intended compatible equipment only after the complete connection has been inspected.
The supplied product information does not specify a maximum load capacity for this particular 1.5m boom arm.
Therefore, a specific SWL or maximum equipment weight should not be assumed.
When using the boom arm, consider:
Weight of the mounted equipment
Position of the equipment
1.5m projection length
Truss profile
Clamp connection
Complete truss configuration
Dynamic loads
Overall structural stability
A longer extension increases the projection distance from the main truss and should therefore be evaluated as part of the complete structural configuration.
For professional concert or rigging applications, the allowable load should be confirmed from the manufacturer's engineering data or project-specific structural calculations.
The aluminum construction provides a practical accessory for compatible truss systems.
The 1.5m length creates a useful extended mounting position.
Dual welded clamps provide two integrated attachment points.
Designed for compatible:
F32 / F33 / F34
truss systems.
Suitable for stage, concert, event, exhibition, and display applications where an extended truss mounting point is required.
One of the most practical applications for a boom arm is stage lighting.
The extension can provide additional fixture positions where direct mounting on the main truss is not sufficient.
Typical uses include:
Front lighting
Side lighting
Stage lighting extensions
Concert lighting
Performance lighting
Event production
The actual allowable fixture load depends on the complete truss and boom arm configuration. No load rating is provided in the supplied information.
The 1.5m boom arm is suitable for compatible event truss systems where additional equipment positions are required.
It can be incorporated into:
Concert structures
Stage production
Event truss
Performance structures
Corporate events
Temporary event installations
For professional rigging applications, the complete structure should be checked before loading the extension tube.
For complete truss solutions, explore Dragonstage Truss & Rigging.
The boom arm can also be used with compatible exhibition truss systems to create extended positions for:
Display lighting
Signage
Promotional elements
Decorative components
Exhibition accessories
For exhibition booth structures, explore Exhibition Booth Solutions.
A typical installation concept is:
Confirm that the existing structure uses a compatible F32, F33, or F34 truss.
Place the 1.5m extension tube at the required location on the truss.
Position both welded clamps correctly around the compatible truss members.
Install and tighten the applicable connection hardware.
Verify that the boom arm is correctly positioned and that both clamp connection points are secure.
Attach the intended compatible equipment only after the complete connection has been inspected.
The supplied product information does not specify a maximum load capacity for this particular 1.5m boom arm.
Therefore, a specific SWL or maximum equipment weight should not be assumed.
When using the boom arm, consider:
Weight of the mounted equipment
Position of the equipment
1.5m projection length
Truss profile
Clamp connection
Complete truss configuration
Dynamic loads
Overall structural stability
A longer extension increases the projection distance from the main truss and should therefore be evaluated as part of the complete structural configuration.
For professional concert or rigging applications, the allowable load should be confirmed from the manufacturer's engineering data or project-specific structural calculations.
The aluminum construction provides a practical accessory for compatible truss systems.
The 1.5m length creates a useful extended mounting position.
Dual welded clamps provide two integrated attachment points.
Designed for compatible:
F32 / F33 / F34
truss systems.
Suitable for stage, concert, event, exhibition, and display applications where an extended truss mounting point is required.
Need a 1.5m aluminum boom arm for F32, F33, or F34 truss?
Send us your truss model, application, required quantity, and equipment to be mounted, and we can help confirm the appropriate boom arm configuration and compatibility.
Explore more Truss Accessories for additional truss connection and mounting components.
