The DragonStage F44 Truss Lifting and Hanging Bracket is designed for nominal 400×400mm (15.75×15.75in) square truss systems with compatible Ø48–52mm (1.89–2.05in) main tubes.
Featuring two round-tube clamps, a connecting bar, and a central M12 eye bolt with a stated Ø30mm (1.18in) inner opening, this accessory is offered for two application configurations:
Upper Truss Hanging
Lower LED Screen Hanging
The product has a manufacturer-stated load capacity of 320kg (approximately 705lb), subject to verification of the applicable loading conditions, installation orientation, connection hardware, and supporting system.
Designed for event rigging companies, truss rental businesses, AV installers, and LED screen installation contractors.
Important: The stated capacity is not independently verified as a working load limit. Overhead use requires confirmation of the complete load path and applicable technical documentation.
| sku: | |
|---|---|
| Availability: | |
| Quantity: | |
Dragon Stage
When lifting or suspending an aluminum truss, the connection between the truss and the lifting equipment is an important part of the complete rigging system.
The appropriate attachment must match the truss geometry, provide the required connection interface, and be suitable for the actual forces introduced by the installation.
The DragonStage F44 Truss Lifting Bracket is designed for nominal 400×400mm square truss with main tubes in the stated Ø48–52mm range.
The illustrated TS-44-2 assembly features two round-tube clamps connected by a horizontal mounting bar, with a central M12 eye bolt.
The supplied product specification states a load capacity of 320kg.
Two application configurations are offered:
Upper Truss Hanging: For an appropriately specified truss lifting or suspension interface.
Lower LED Screen Hanging: For a compatible LED screen hanging arrangement where the load path and connections have been verified.
Although these applications may use related components, their attachment arrangements and applicable loads must be established separately.
The bracket is suitable for buyers who already know their truss model and require a matching hanging connection rather than a general-purpose lighting clamp.
The bracket is intended for nominal 400×400mm (15.75×15.75in) truss systems.
It is commonly associated with the F44-style square truss format.
The actual clamp spacing and truss connection geometry must match the installed truss.
The stated clamping diameter range is:
48–52mm / 1.89–2.05in
This range refers to the supported round-tube size, not the truss cross-section dimension.
Matching tube diameter alone does not guarantee complete compatibility.
The illustrated bracket uses two round-tube clamps attached to a common mounting bar.
This arrangement provides two connection locations on the intended truss system.
The actual force distribution between the clamps depends on the mounting geometry and installation conditions.
The product features a central eye bolt marked M12.
The supplied image identifies an eye inner diameter of approximately 30mm (1.18in).
The eye bolt provides an attachment interface, but its permissible loading depends on its material, geometry, thread engagement, and installed orientation.
The product has a stated capacity of:
320kg / approximately 705lb
The actual permissible working load must be established from the applicable product documentation.
The stated figure must not be interpreted as an unrestricted capacity for every truss or LED screen configuration.
The product series is offered for:
Upper Truss Hanging
Lower LED Screen Hanging
Each version should be supplied with the correct mounting geometry and connection arrangement for its intended application.
The bracket combines two tube clamps with an eye-bolt attachment interface.
This creates a defined accessory for buyers seeking a matching truss connection component.
Specification | Details |
|---|---|
Brand | DragonStage |
Reference Model | TS-44-2, as illustrated |
Product Type | Truss Lifting / Hanging Bracket |
Nominal Truss System | 400×400mm / 15.75×15.75in |
Compatible Tube Diameter | Ø48–52mm / 1.89–2.05in |
Clamp Arrangement | Dual Round-Tube Clamps |
Eye Bolt Thread | M12 |
Stated Eye Inner Diameter | Ø30mm / 1.18in |
Manufacturer-Stated Capacity | 320kg / approx. 705lb |
Verified Working Load Limit | Not independently established |
Application Version A | Upper Truss Hanging |
Application Version B | Lower LED Screen Hanging |
Clamp Finish | Black |
Connecting Bar Finish | Silver |
Application | Compatible truss and LED screen hanging systems |
Technical Note: The stated 320kg capacity requires confirmation of the applicable loading configuration, test or calculation documentation, and complete connection conditions before being used as a working load limit.
This version is intended for an appropriately designed connection between the truss and the lifting or suspension arrangement.
It may be considered where the rigging design specifies a compatible dual-clamp attachment.
Before selecting this version, confirm:
Actual truss model
Main tube diameter
Clamp connection positions
Required load direction
Lifting equipment interface
Verified permissible loads
This version is intended for a suitable LED screen hanging arrangement.
The connection must match the screen's specified support or hanging interface and the associated supporting structure.
Before selecting this version, confirm:
LED screen system and cabinet model
Screen hanging interface
Total suspended equipment weight
Connection orientation
Supporting truss configuration
Verified connection and system capacities
Recommended SKU Attribute: Application Type
Upper Truss Hanging
Lower LED Screen Hanging
The actual construction and supplied hardware for each option must be confirmed. Do not assume that rotating or reversing one version automatically makes it suitable for the other.
Your application requires a compatible attachment point for the truss itself within a verified lifting or suspension design.
Your application requires a compatible connection associated with an LED screen hanging arrangement.
A bracket may physically fit the truss while still being unsuitable for the intended loading direction or equipment connection.
The correct selection depends on the entire load path.
If you use a nominal 400mm square spigot truss, you can review the 400mm Spigot 6-Way Truss Corner Cube as an example of a related truss-system component.
This link is provided for system identification. It does not establish that the corner cube and lifting bracket are structurally compatible.
The two versions should be selected according to the actual function.
Selection Point | Upper Truss Hanging | Lower LED Screen Hanging |
|---|---|---|
Main Purpose | Truss lifting/suspension connection | LED screen hanging connection |
Equipment to Verify | Truss and lifting system | LED screen and supporting system |
Connection Geometry | Truss attachment | Screen/support attachment |
Load Requirements | Truss system loads | LED screen system loads |
Hardware Requirements | According to rigging design | According to LED hanging design |
Engineering Review | Required for lifting/suspension | Required for suspended LED systems |
Both versions must use an appropriate, verified assembly.
The product has a manufacturer-stated load capacity of 320kg.
However, several questions must be answered before using that value for an actual installation:
Does 320kg represent a working load limit, test load, or another declared value?
Does it apply to the complete dual-clamp bracket?
What load direction was used?
What truss model was used during testing or assessment?
Are both clamps required to engage the truss simultaneously?
What eye-bolt and fastener specifications apply?
Does the stated value apply equally to both application versions?
Until these questions are resolved, the 320kg figure should be treated as a supplied product claim rather than a verified site-specific capacity.
For professional suspended installations, the complete rigging design must be reviewed by qualified personnel.
The upper version may be used as part of an appropriately specified truss lifting arrangement.
The truss, lifting equipment, attachment points, and support system must be suitable for the intended operation.
Event production companies may require specific attachment accessories for compatible truss systems.
The correct bracket must be selected according to the actual rigging design.
The lower version may be considered where a compatible LED screen hanging system calls for a connection of this type.
Large LED walls require complete project-specific technical review.
Rental companies may stock matching hanging components for their existing truss and display systems.
Keeping different models and applications clearly identified helps reduce accidental substitution.
The number of brackets cannot be determined from the overall truss width or LED screen dimensions alone.
For truss lifting, the required quantity and attachment positions depend on the complete lifting design.
For LED screen hanging, they depend on the specified suspension points and supporting system.
For example, if a verified installation drawing specifies two identical hanging brackets at two designated connection locations, the required purchasing quantity would be:
2 connection locations × 1 bracket = 2 brackets
This is only a procurement example.
It does not establish that two brackets are sufficient for a particular truss or LED wall.
The final quantity must follow the approved or verified system arrangement.
For one designated hanging connection, the main component groups may include:
Component | Requirement |
|---|---|
F44 Hanging Bracket | 1 selected version |
Compatible Truss | Required |
Matching Clamping Hardware | According to supplied model |
Eye Bolt and Fasteners | As specified |
Compatible Lifting / Hanging Interface | According to application |
Additional Required Rigging Components | According to complete system design |
The exact contents of each product package must be confirmed before ordering.
Correct attachment hardware
Compatible 400mm truss system
Verified load-bearing connections
Appropriate lifting or hanging equipment
Complete rigging design or installation instructions
Related products should only be added where the system design calls for them.
For example, customers researching event lifting equipment can explore the Manual Chain Hoist for Stage Rigging.
The hoist must be selected separately and cannot be assumed compatible with this bracket based on the eye-bolt dimensions alone.
For buyers comparing different LED suspension interfaces, see the Steel LED Video Wall Hanging Hook for Truss Mounting.
This is a different hanging accessory and is not automatically interchangeable with the F44 bracket.
For a different truss lifting connection arrangement, review the 290mm Truss Adapter with Eyelet.
This product is identified for a different nominal truss system. Its listed load figure must not be transferred to the current F44 product.
The Low-Profile Eye Clamp with Eye Bolt is another connection design for buyers comparing eye-bolt interfaces.
For a different lifting-system arrangement, see the 290mm / 400mm Spigot Truss Sleeve Block.
A sleeve block is a separate structural component and should not be treated as a substitute for this bracket.
For LED screen alignment rather than overhead lifting, explore the Adjustable LED Screen Leveling Spacer Block.
Its function is different from a suspension connection.
The bracket is intended for nominal 400×400mm truss with Ø48–52mm main tubes.
Confirm the tube spacing, external dimensions, and clamp mounting positions.
The two clamps must engage the intended truss members according to the specified design.
Do not remove one clamp or alter the connection arrangement without technical verification.
Confirm the material grade, thread engagement, installed orientation, and applicable load rating of the eye bolt.
A nominal M12 thread does not independently establish the allowable load.
The mating connector must fit the eye and be suitable for the required loading and movement.
The lifting or suspension force must be transferred through the intended components into the supporting system.
Each relevant component and connection must have suitable capacity.
For suspended LED walls, the installation should be assessed as a complete system, including all screen modules, hanging bars, connections, supporting truss, hoists, and relevant environmental loads.
Outdoor use introduces additional considerations, including wind loading and overall structural stability.
No wind rating or outdoor engineering approval is established by the supplied product information.
The nominal truss size and tube diameter do not establish identical connection geometry.
The loading conditions behind the stated capacity must be confirmed.
Upper truss hanging and lower LED screen hanging may require different connection geometries and load conditions.
An M12 eye bolt does not independently establish the working load of the complete bracket.
The number and positions of lifting attachments must follow the complete suspension design.
Components with similar dimensions or load claims may not be compatible.
It is specified for nominal 400×400mm F44-style square truss.
The supplied compatible tube range is Ø48–52mm.
The manufacturer-stated capacity is 320kg, approximately 705lb. Its applicable working load conditions require verification.
The image identifies an M12 eye bolt.
The supplied image identifies an inner opening of Ø30mm, approximately 1.18in.
The illustrated TS-44-2 assembly uses two round-tube clamps.
The upper version is intended for a suitable truss lifting or suspension connection. The lower version is intended for a suitable LED screen hanging connection. Their actual construction and permissible loading must be confirmed separately.
Compatibility with nominal 290mm F34 truss has not been established. Do not assume that the same bracket fits both 290mm and 400mm truss systems.
Potential compatibility depends on the complete lifting design, attachment interface, rated capacities, and operating requirements.
A large suspended LED wall requires project-specific structural and rigging review. The bracket's nominal capacity alone cannot establish the allowable complete screen system.
Need a matching hanging connection for a nominal 400mm aluminum truss or a compatible LED screen installation?
The DragonStage F44 Truss Hanging Bracket features a dual-clamp connection design, an M12 eye-bolt interface, and a manufacturer-stated 320kg capacity.
For a quotation, please provide:
Required application: Upper Truss Hanging or Lower LED Screen Hanging
Quantity
Actual truss dimensions and main tube diameter
Truss manufacturer and model
Intended load and attachment configuration
Lifting or hanging equipment details
Indoor or outdoor installation
Delivery destination
Contact DragonStage for product pricing, dimensional confirmation, and compatibility review.
For suspended truss systems and LED walls, the complete installation requires appropriate technical verification before use.