The DragonStage Truss-Mounted Speaker Bracket features a Ø35mm (1.38in) speaker mounting tube with an 85mm (3.35in) upper section, an illustrated 299mm (11.77in) offset-arm dimension, and a 239mm (9.41in) clamp assembly dimension.
Designed to provide an outward speaker mounting position from a compatible vertical truss tube, this bracket is a practical accessory for event sound systems, DJ truss towers, and small AV installations.
The metal support arm connects to a truss-mounted clamp assembly, while the upper pole is intended for suitable speaker sockets.
Before ordering, confirm the speaker's pole socket, truss tube diameter, clamp connection, and permissible equipment load.
| Color: | |
|---|---|
| Availability: | |
| Quantity: | |
Dragon Stage
When setting up sound equipment for an event, the location of the speaker is just as important as the speaker itself.
Sometimes a standard floor-standing speaker stand occupies valuable space or does not fit the planned equipment arrangement.
If a compatible truss tower is already part of the event setup, a dedicated speaker mounting bracket may provide an alternative mounting position.
The DragonStage Truss-Mounted Speaker Bracket is designed to connect to a suitable vertical truss tube and provide an offset support position for a speaker with a compatible pole-mount socket.
The assembly includes a round upper mounting pole, an angled support arm, and a truss-side clamping arrangement.
The upper speaker mounting pole has a specified outside diameter of 35mm (1.38in) and a visible mounting section measuring 85mm (3.35in).
The image also identifies a 299mm support-arm dimension and a 239mm dimension along the truss attachment assembly.
The exact horizontal projection from the truss and the applicable loading conditions must be confirmed from the complete manufacturing drawing.
This bracket is intended for event rental companies, mobile DJs, AV technicians, and buyers working with compatible truss tower systems.
The top of the bracket features a cylindrical pole with an outside diameter of:
Ø35mm / 1.38in
This diameter is commonly used for pole-mounted PA speaker systems.
However, the actual speaker socket must be checked before ordering.
A matching nominal diameter does not automatically establish compatibility with every speaker cabinet.
The visible upper mounting section has a stated length of:
85mm / 3.35in
This is the portion of the tube identified in the supplied photograph.
The actual usable insertion depth depends on the speaker's pole socket and mechanical interface.
The bracket includes an angled support arm between the upper speaker pole and the truss-mounted assembly.
The drawing identifies a dimension of:
299mm / 11.77in
This dimension is measured along the marked line in the product image.
It should not automatically be treated as the exact horizontal speaker offset.
The bracket attaches to a compatible truss tube using the illustrated clamping arrangement.
The mounting assembly includes two vertically separated connection points in the photograph.
The marked assembly dimension is:
239mm / 9.41in
The precise mounting reference points and actual clamp-to-clamp spacing must be confirmed.
The support arm uses welded tubular components to form the speaker mounting geometry.
The exact material grade, tube wall thickness, weld details, and permitted loading must be confirmed for the supplied model.
Where an appropriate truss tower and verified mounting arrangement already exist, a truss-mounted speaker bracket may reduce the need for an additional floor-standing speaker tripod.
This is a layout advantage, not a guarantee of structural suitability.
Specification |
Details |
|---|---|
Brand |
DragonStage |
Product Type |
Truss-Mounted Speaker Bracket |
Speaker Mounting Tube Diameter |
Ø35mm / 1.38in |
Upper Tube Length |
85mm / 3.35in |
Illustrated Support Arm Dimension |
299mm / 11.77in |
Illustrated Clamp Assembly Dimension |
239mm / 9.41in |
Main Construction |
Welded tubular support arm |
Attachment Type |
Truss-side clamp assembly |
Main Application |
Pole-mounted speaker positioning |
Suitable Speaker Models |
Subject to compatibility verification |
Finish |
Metallic / silver appearance shown |
The four dimensional values are taken from the supplied product photograph. The actual horizontal offset, component material, load rating, and compatible truss system require further confirmation.
The bracket is positioned against a suitable vertical truss tube.
The clamp assembly must match the actual truss tube dimensions and intended mounting position.
The clamp components are fastened using their designated hardware.
All connections must be installed according to the confirmed assembly requirements.
The upper tube measures Ø35mm.
Before installing a speaker, confirm that its mounting socket is designed for the corresponding pole dimensions and that adequate insertion and retention are available.
The speaker, mounting arm, clamps, truss tower, and complete supporting structure must be suitable for the actual loading.
A speaker should not be installed solely because its socket physically fits the mounting pole.
Mobile DJs may use a truss-mounted speaker bracket when an existing compatible truss arrangement provides a suitable position for a speaker.
The installation should be planned with the overall event layout and speaker coverage requirements.
Small AV companies may need alternative speaker positions when stage or venue space is limited.
A truss-mounted bracket can be considered where the complete support arrangement permits it.
Rental companies that already own compatible vertical truss towers may consider this type of accessory for selected sound equipment configurations.
The bracket may provide a speaker mounting option for suitable indoor presentations where the supporting truss is part of the equipment layout.
For exhibition setups using suitable truss structures, a side-mounted speaker position may help coordinate sound equipment with the surrounding display arrangement.
Measure or confirm the pole-mount socket specified by the speaker manufacturer.
This product uses a nominal Ø35mm mounting tube.
If the speaker uses a different attachment interface, another mounting accessory may be necessary.
The tube diameter and clamp geometry must match.
Do not assume that all 290mm or 400mm square truss systems use identical clamp interfaces.
The speaker weight is necessary for determining the appropriate mounting solution.
However, the permissible load also depends on the actual projection, clamp connections, truss structure, and mounting orientation.
For a simple mobile DJ system without an existing truss tower, a conventional speaker stand may be more practical.
For example, compare the Adjustable Speaker Stand with Winch Lift System.
This is a separate support system with different installation requirements.
If the application uses a different truss or attachment arrangement, DragonEvent also offers a Speaker Mounting Pole Extension with Truss Clamps for DT34P / DT44P.
That product should be considered an alternative design, not an automatically interchangeable replacement.
Before ordering, confirm all three interfaces.
The speaker must accept the specified Ø35mm pole.
The usable insertion depth, securing method, and allowable speaker load must be appropriate.
The clamp assembly must match the actual truss tube diameter and geometry.
The illustrated bracket should not be assumed compatible with every F34 or F44 truss system.
The complete truss tower and supporting arrangement must be suitable for the additional eccentric load introduced by the side-mounted speaker.
The speaker bracket does not independently establish the tower's load capacity or stability.
For a typical stereo speaker arrangement using two separately pole-mounted speakers, the initial purchasing quantity may be:
2 speaker brackets — one for each speaker.
However, this is only a purchasing example.
The actual number and positioning must follow the equipment layout, speaker mounting requirements, and structural verification.
For an individual compatible speaker, one bracket may be sufficient if the complete installation is confirmed suitable.
Do not use multiple brackets on one truss tower without checking their combined effects on the supporting structure.
For one compatible speaker mounting position, the component groups are:
Component | Configuration |
|---|---|
Truss-Mounted Speaker Support Bracket | 1 assembly |
Ø35mm Speaker Mounting Tube | Integrated as shown |
Truss Clamp Assembly | Matching arrangement |
Necessary Fasteners | According to supplied design |
Compatible Speaker | Selected separately |
Suitable Supporting Truss | Required |
The exact package contents should be confirmed in the final quotation.
A compatible speaker with the appropriate pole socket
Suitable truss structure
Matching mounting hardware
Any necessary speaker retention components specified for the installation
Independent speaker stands
Alternative truss speaker mounting systems
Suitable speaker cable management accessories
Avoid adding unnecessary products if the customer's existing equipment already provides the required functions.
For buyers using an F34-style truss tower, compare the DT-F34 Aluminum Truss Speaker Mount.
Its connection method and intended speaker mounting arrangement differ from those of a Ø35mm pole-style support.
Explore the Speaker Mounting Pole Extension with Truss Clamps for another truss-mounted audio support arrangement.
For installations where a truss tower is unnecessary, the Adjustable Speaker Stand with Winch Lift System may provide an alternative.
For buyers comparing pole-mounted PA speakers with floor-monitor equipment, see the Active Coaxial Stage Monitor Speaker.
A floor monitor is a different speaker application and should not automatically be treated as suitable for this Ø35mm mounting bracket.
If you are selecting a complete PA setup, read the Sound System Buying Guide for Beginners.
Choose the speaker system and its required positioning before purchasing mounting accessories.
The clamps must engage the appropriate mounting tube and be installed according to the verified product configuration.
The Ø35mm pole must match the speaker's intended mounting interface.
A speaker supported to the side of a truss produces a different loading arrangement from a speaker positioned directly above a central support.
The actual forces depend on the speaker weight, mounting position, geometry, and support configuration.
The supporting structure must be suitable for the additional load and associated forces.
The speaker's mounting and retention arrangements must follow its manufacturer's requirements and the applicable installation conditions.
This bracket should not be used for overhead speaker suspension or other unverified load-bearing arrangements.
Outdoor use requires additional consideration of environmental exposure, supporting structure, and the complete installation.
No outdoor loading or wind rating has been provided for this bracket.
Check the actual speaker model before ordering.
The 299mm dimension is shown along a marked line in the photograph.
The true horizontal offset must be confirmed from a technical drawing.
A nominal truss size does not guarantee the clamp will fit its main tube.
The allowable speaker load has not been established for this product.
The bracket forms only one part of the full installation.
The truss tower and its supports must also be suitable.
Different brackets may have different pole dimensions, clamp arrangements, offsets, and allowable loads.
The upper mounting tube has a specified outside diameter of Ø35mm (1.38in).
The photograph identifies an 85mm (3.35in) upper mounting section.
It is the marked dimension along the support-arm arrangement. The exact horizontal projection requires confirmation.
It is shown along the vertical truss mounting assembly. Its exact reference points and clamp spacing should be confirmed from a drawing.
Compatibility depends on the actual truss tube dimensions, clamp geometry, and complete loading conditions.
Only if the speaker's socket and mounting requirements match and the complete support arrangement has been verified for the intended speaker.
A verified working load limit has not yet been supplied for this bracket.
This requires verification of the complete tower and mounting arrangement, including the location and loading of both brackets.
No. This product uses a pole-style speaker mounting interface. A speaker hanging bracket may use a different connection arrangement.
Please provide the speaker model and weight, pole socket dimensions, truss tube diameter, proposed mounting position, and required quantity.
Need to position a compatible PA speaker beside an event truss tower?
The DragonStage Truss-Mounted Speaker Bracket features a Ø35mm speaker mounting pole, a welded offset support arm, and a truss-side clamp assembly.
For a quotation, please provide:
Required quantity
Speaker model and weight
Speaker pole-mount socket dimensions
Truss model and tube outside diameter
Intended mounting position
Delivery destination
Contact DragonStage for pricing, dimensional confirmation, and compatibility review.