Compact 100x100mm (3.94x3.94in) aluminum mini square truss with four main tubes, diagonal bracing, and spigot-style end connections. Designed for exhibition booths, trade show displays, retail decoration, DJ event backdrops, and lightweight decorative structures. Available lengths, tube specifications, connecting hardware, and load ratings should be confirmed before ordering.
| Length: | |
|---|---|
| Availability: | |
| Quantity: | |
Dragon Stage
The 100x100mm F14-Style Aluminum Mini Square Truss is a compact four-chord truss designed for smaller-scale exhibition and event display applications.
With a nominal square cross-section of 100x100mm (approximately 3.94x3.94in), this truss is considerably smaller than conventional 290mm or 400mm event truss systems.
Its compact design makes it a practical option for buyers who need the appearance and modular construction of aluminum truss without the size of a full-scale stage truss.
The product features four longitudinal main tubes connected by diagonal bracing. The illustrated ends have cylindrical connection fittings intended for a matching spigot-style connection system.
Typical applications include:
Trade show exhibition booths
Retail and shop displays
Promotional display frames
Lightweight decorative DJ backdrops
Product presentation structures
Small event decoration
Indoor display towers
Exhibition signage frames
This product is intended primarily for compact display and decorative applications. Any lighting suspension or other load-bearing arrangement requires verified technical specifications for the proposed configuration.
For larger truss systems, browse our Straight Truss collection.
1. Compact 100x100mm Cross-Section
The 100mm square profile is suitable for smaller exhibition displays and decorative event structures where full-size stage truss would be unnecessarily bulky.
2. Four-Chord Square Truss Design
Four longitudinal tubes form the square structure, with diagonal members connecting the main chords.
3. Aluminum Construction
The mini truss uses an aluminum tubular frame with a natural silver-colored appearance.
The exact alloy and temper must be confirmed for the supplied product.
4. Spigot-Style End Connections
The illustrated truss includes cylindrical end fittings intended for a matching pin-and-spigot connection arrangement.
5. Modular Straight Sections
Matching straight sections can be connected to create longer display elements when the connection system is compatible.
6. Exhibition-Friendly Appearance
The compact frame is suitable for decorative structures where the truss itself is part of the visual design.
7. Compatible System Expansion
Matching corners, bases, and junctions may allow different display arrangements, subject to availability and verified compatibility.
Item |
Specification |
|---|---|
Product Type |
Aluminum Mini Square Truss |
Product Style |
F14-Style |
Nominal Cross-Section |
100x100mm / 3.94x3.94in |
Truss Shape |
Four-Chord Square / Box Truss |
Main Tube Arrangement |
4 Longitudinal Chords |
Internal Structure |
Diagonal Bracing |
Frame Appearance |
Natural Silver Aluminum |
Connection Style |
Spigot-Type End Fittings |
Aluminum Alloy / Temper |
6061 |
Main Tube Diameter |
30mm |
Main Tube Wall Thickness |
2mm |
Diagonal Brace Diameter |
12mm |
Available Section Lengths |
custom |
Connector Pin Dimensions |
spigot |
Section Weight |
Depends on Length and Actual Specifications |
Main Applications |
Exhibition, Display, Decoration, Small Event Setups |
Published examples of 100mm mini square truss include:
Aluminum alloy 6082-T6
Main tubes Ø20x2mm
Diagonal bracing Ø5mm
Straight sections from 0.5m to 3m
Spigot-type connections
These are reference specifications for a comparable F14-type product, not automatically confirmed specifications for every DragonEvent variant.
Tube dimensions and connecting hardware must be checked before final quotation or production.
The compact profile can be incorporated into small exhibition frames, product displays, and decorative booth structures.
Buyers should first determine the display width, height, and whether any equipment or signage will be attached.
Mini square truss can be used to create decorative framing in stores and commercial display environments.
The truss can provide a visual framework for suitable DJ decoration and small event displays.
If lighting fixtures or other equipment will be mounted, their total weight, attachment method, and proposed support arrangement must be reviewed.
Compact truss sections may be incorporated into suitable freestanding display arrangements with matching connections and bases.
Vertical mini truss sections can form part of decorative product display towers where the complete structure is properly specified.
Begin with the required display dimensions rather than purchasing the longest section available.
For reference, common straight-section lengths in comparable 100mm mini truss product ranges include:
Reference Length | Approx. Imperial Length |
|---|---|
0.5m | 1.64ft |
1.0m | 3.28ft |
1.5m | 4.92ft |
2.0m | 6.56ft |
2.5m | 8.20ft |
3.0m | 9.84ft |
Actual available lengths must be confirmed for this product.
Shorter sections can reduce the overall dimensions of the assembled display and may be easier to transport.
Longer straight sections may reduce the number of joints, provided they match the required layout and transportation constraints.
Plan the complete booth frame first, including corners, vertical sections, horizontal sections, and bases.
Do not calculate the order from the total straight length alone.
The required quantity depends on the desired display configuration.
For a simple straight decorative run using equal-length sections:
Number of sections = Required straight length ÷ Section length
For example, a 2m decorative run could use two matching 1m straight sections, assuming the joint allowance and available product dimensions permit the intended finished length.
For a rectangular exhibition frame, additional corner connectors, support components, and bases may be required.
The finished dimensions must account for the actual connector geometry.
Not every 100x100mm mini truss uses interchangeable connectors.
Even when two products share the same nominal square dimensions, their main tube sizes, end fitting geometry, pin diameters, and connection tolerances may differ.
Before purchasing replacement sections or combining products from different suppliers, confirm:
Nominal truss cross-section
Main tube diameter
Main tube center-to-center spacing
End fitting dimensions
Spigot dimensions
Pin and retaining hardware
Matching corner and junction specifications
F14-Style describes the general mini truss format. It does not, by itself, guarantee compatibility with another manufacturer's F14 system.
For a small display application, one straight truss section may be sufficient when used with the appropriate supporting arrangement.
For a frame or booth structure, purchase the required straight sections plus the compatible corners, bases, and connecting hardware.
For more complex arrangements, provide the overall dimensions and proposed use so the complete component configuration can be reviewed.
Required / Usually Needed
Matching Spigot Connectors and Pins
When joining two straight sections, use the specified connecting hardware for the actual truss model.
Browse our Truss & Rigging Accessories collection.
Optional / Depending on the Application
Truss Corners and Junctions
For rectangular exhibition frames and decorative structures, suitable corner pieces may be required.
Explore our Corners & Junctions collection.
Base Plates
For freestanding display arrangements, appropriately specified base components may be needed.
Their suitability must be confirmed for the actual structure, loading, and environmental conditions.
Before assembly:
Check all main tubes, diagonal members, and welds for visible damage.
Confirm the correct spigots, pins, and retaining hardware.
Ensure the connecting components are fully engaged.
Use only matching corner and base components.
Check the completed arrangement for correct geometry and secure connections.
Do not suspend equipment without verified load information and suitable rigging arrangements.
For freestanding or outdoor structures, obtain a project-specific assessment of stability and environmental loading.
A decorative mini truss should not automatically be used as a substitute for a verified stage lighting truss or overhead rigging system.
1. Assuming All F14-Style Trusses Are Compatible
Matching overall dimensions do not guarantee matching spigot fittings or connection hardware.
2. Selecting the Wrong Tube Specification
Products sold as 100mm mini truss may use different main tube diameters, wall thicknesses, and brace dimensions.
3. Ordering Straight Sections Without Corners
A display frame may require several corner and junction components, not just straight truss.
4. Forgetting Bases and Support Components
Freestanding arrangements require suitable supporting components and stability verification.
5. Assuming Small Size Means Unlimited Installation Options
Mini truss is not automatically suitable for hanging speakers, LED screens, or other concentrated loads.
6. Ignoring Shipping Length
Choose section lengths with the actual packing dimensions and transportation method in mind.
1. What size is this mini truss?
The nominal square cross-section is 100x100mm, approximately 3.94x3.94in.
2. What does F14-Style mean?
It refers to a compact mini square truss format commonly associated with 100mm truss systems. Compatibility with a specific brand or model must be verified separately.
3. Is this a square or triangle truss?
The illustrated product has four longitudinal main tubes, making it a square or box truss.
4. What is the main tube size?
The exact tube specification for the supplied product must be confirmed. Comparable F14-type products may use Ø20x2mm main tubes.
5. What material is used?
The illustrated product is an aluminum mini truss. The exact alloy and temper must be confirmed before ordering.
6. What lengths are available?
Comparable mini truss systems offer several section lengths. Confirm the available DragonEvent lengths in the selected specification.
7. Does it use spigot connections?
The illustrated product has spigot-style end fittings. The exact matching pins and connecting hardware must be confirmed.
8. Can it be used for exhibition booths?
Yes, it can be incorporated into appropriately designed exhibition and display structures.
9. Can it support stage lighting?
Only when the proposed loads, connections, span, support arrangement, and complete installation have been verified for that purpose.
10. Is it compatible with Global Truss F14?
Compatibility cannot be guaranteed from the F14-Style designation alone. The exact connection geometry and technical specifications must be checked.
11. Can it be used outdoors?
Outdoor use requires appropriate assessment of the complete structure, including wind exposure, stability, supports, and connections.
12. Are corner pieces and bases included?
They should not be assumed included with an individual straight truss section unless specifically listed in the selected package.
Looking for a compact aluminum mini truss for an exhibition booth, retail display, or small event decoration?
Choose our 100x100mm F14-Style Mini Square Truss and confirm the required straight-section lengths.
For complete display frames, send DragonEvent your overall width, height, depth, intended attachments, and installation location.
We can help identify the required straight sections, matching corners, connecting hardware, and other necessary components.