| Availability: | |
|---|---|
| Quantity: | |
CLM-01
Dragon Stage
A standard 9 m × 6 m × 6 m bolt truss package typically includes:
Straight truss segments (to sum to 9 m on the long side × 6 m on the short side, on all four top and bottom chords)
90° corner blocks at the four top corners
Vertical truss legs to reach 6 m height
Base plates / foot plates at the bottom of each leg
Screws, hex nuts, and washers for every joint
Outriggers / foot plates, ballast plates, or hoist blocks
https://www.instagram.com/reel/DdlKuCVNXv9/?obrf=d2UyeWU4cWdkNGc2
Screw / Bolt Connection, Not Spigot — Each joint is locked with a threaded bolt and nut. No spring pins, no loose clips, no accidental disassembly during bump-out.
Fast Assembly — Two-person crew can erect the full 9×6×6 m frame in roughly half a day; no hammering or pin alignment required.
Rigid, Rattle-Free Frame — Bolted joints eliminate the play common in spigot-and-pin systems, giving a quieter, more stable rig for lighting and audio.
Welded Box Section — Continuous triangular bracing on all four sides provides even load distribution in both directions.
Lightweight Aluminum — Easy to carry, truck, and lift; naturally corrosion-resistant for outdoor events.
Modular & Reconfigurable — Straight segments, corners, and T-joints can be reordered later to expand or reshape the structure.
Clean Visual Finish — Smooth weld beads and uniform brushed aluminum suit exhibitions, weddings, and brand activations where the truss itself is on camera.
表格
Item | Specification |
|---|---|
Product Name | Aluminum Screw/Bolt Truss System |
Overall Dimensions (L × W × H) | 9.0 m × 6.0 m × 6.0 m |
Truss Type | Square Box Truss (4-side chord) |
Connection Type | Screw / Bolt with Hex Nut (no spigot, no pin) |
Main Tube Size |
|
Brace Tube Size |
|
Truss Section |
|
Material |
|
Surface Finish | Brushed / Mill Finish |
Segment Lengths |
|
Max Span (Single Row) |
|
Max Vertical Load |
|
Packing | bubble wrap |
Application | Stage, Exhibition, Concert, Wedding, DJ Booth, Roof System |
Outdoor stage roof and lighting rigs
Trade show booths and exhibition stands
Concert, festival, and touring stages
Wedding and banquet hall overhead structures
DJ booth and mobile disco rigs
Product launch and brand activation backdrops
Gymnastics, acrobatic, and aerial point rigs
Q1: What is the difference between screw truss and spigot truss? A: Spigot truss uses a tapered steel pin inserted into a welded sleeve, locked with an R-clip. Screw (bolt) truss uses a threaded bolt and nut through aligned lugs at each end. Screw truss is more rigid, has no loose small parts, and is preferred for long-term or repeat installations; spigot truss is faster to assemble for one-night shows.
Q2: Do I need any special tools? A: Only standard metric spanners / socket wrenches to tighten the hex nuts. No hammer, no pin press, no lifting equipment beyond what you would normally use to raise a 6 m truss tower.
Q3: Can this be used outdoors? A: Yes, aluminum does not rust. However, any freestanding truss over 4 m tall must be anchored, ballasted, or guyed according to local wind load and site conditions — we recommend a structural engineer sign-off for permanent or high-wind installations.
Q4: How long does it take to assemble? A: A two-person crew typically assembles the full 9×6×6 m frame in about 4–6 hours, depending on experience and whether a lifting machine is available.
Q5: Can I extend or reconfigure this later? A: Yes. All segments share the same bolt pattern, so you can add extra straight pieces, corners, or T-joints to make longer spans, wider roofs, or additional towers.
Q6: What is the lead time? A: 14 DAYS