| Availability: | |
|---|---|
| Quantity: | |
Dragonstage
Built around high-output two-channel amplification, the A213–A218 series provides progressively higher stereo power ratings across its three models.
The A213 delivers 2 × 1,300W at 8Ω and 2 × 1,750W at 4Ω. The A215 increases the output to 2 × 1,500W at 8Ω and 2 × 2,000W at 4Ω. At the top of the range, the A218 delivers 2 × 1,800W at 8Ω and 2 × 2,300W at 4Ω.
All three models share the same listed signal-performance specifications, including THD below 0.05%, IMD below 0.04%, a signal-to-noise ratio of at least 102dB and a damping factor of at least 280.
These amplifiers are intended for stereo operation. Bridge mono mode is listed as N/A for all three models.
Three high-output models: A213, A215 and A218 provide different power levels for professional audio systems.
Two-channel stereo operation: Designed for demanding stereo PA and sound reinforcement configurations.
High 8Ω output: Rated stereo power ranges from 2 × 1,300W to 2 × 1,800W.
High 4Ω output: Rated stereo power ranges from 2 × 1,750W to 2 × 2,300W.
Low distortion specifications: THD below 0.05% at 10% full power.
Low intermodulation distortion: IMD below 0.04% at 60Hz/7kHz.
Signal-to-noise ratio: ≥102dB.
Damping factor: ≥280.
Wide frequency response: 20Hz–20kHz.
Consistent chassis dimensions: All three models measure 483 × 548 × 132mm.
Specification | A213 | A215 | A218 |
|---|---|---|---|
8Ω Stereo Power (RMS) | 2 × 1300W | 2 × 1500W | 2 × 1800W |
4Ω Stereo Power (RMS) | 2 × 1750W | 2 × 2000W | 2 × 2300W |
Bridge Mono Mode | N/A | N/A | N/A |
THD (10% Full Power) | <0.05% | <0.05% | <0.05% |
IMD (60Hz/7kHz) | <0.04% | <0.04% | <0.04% |
Signal-to-Noise Ratio | ≥102dB | ≥102dB | ≥102dB |
Conversion Speed | ≥60V/μs | ≥60V/μs | ≥60V/μs |
Damping Factor | ≥280 | ≥280 | ≥280 |
Frequency Response | 20Hz–20kHz | 20Hz–20kHz | 20Hz–20kHz |
Input Sensitivity | 0.775V / 1V / 32dB | 0.775V / 1V / 32dB | 0.775V / 1V / 32dB |
Input Impedance | 10KΩ / 20KΩ | 10KΩ / 20KΩ | 10KΩ / 20KΩ |
Dimensions (W × D × H) | 483 × 548 × 132mm | 483 × 548 × 132mm | 483 × 548 × 132mm |
Net / Gross Weight | 36.5 / 41kg | 37 / 41.5kg | 37 / 41.5kg |
The A213 is the entry model in this high-output series. It delivers 2 × 1300W at 8Ω and 2 × 1750W at 4Ω, making it an option for professional PA configurations requiring substantial stereo amplification.
Best For:
Professional concert PA systems
Touring sound reinforcement
Festival stage audio
High-power passive loudspeaker systems
The A215 offers increased output over the A213, providing 2 × 1500W at 8Ω and 2 × 2000W at 4Ω. It is suitable for system designs that require greater amplifier output capacity.
Best For:
Medium-to-large concert sound systems
Touring productions
Professional rental inventories
High-output PA configurations
The A218 is the highest-output model in the series, rated at 2 × 1800W at 8Ω and 2 × 2300W at 4Ω. It is intended for compatible loudspeaker systems with demanding power requirements.
Best For:
Large-scale concert productions
Festival and outdoor stage PA
High-output line array configurations
Professional sound reinforcement systems
The A213–A218 series can be considered for professional audio environments where high stereo amplifier output is required:
Concert Sound Systems: Power amplification for compatible passive loudspeaker configurations at live music events.
Touring Productions: Model choices for professional sound rental and touring equipment inventories.
Festival Stages: High-output stereo amplification for suitable festival PA systems.
Line Array Systems: Amplification for passive line array loudspeakers when their impedance and power ratings match the amplifier.
Passive Subwoofer Systems: Potential use with compatible passive subwoofers, subject to system design and loudspeaker specifications.
Large Venues: Amplifier options for professional sound reinforcement in arenas, theaters and other large performance spaces.
Before selecting an A213, A215 or A218, verify the requirements of the connected loudspeakers and the complete audio system.
Match the amplifier's rated output to the loudspeaker's power-handling specifications.
Confirm the nominal speaker impedance before choosing the 8Ω or 4Ω stereo configuration.
Bridge mono operation is listed as N/A; do not plan a bridged configuration based on this specification.
Confirm input signal compatibility with the connected mixer, processor or audio source.
Verify the required input and output connector types before installation.
Check rack dimensions and installation clearance. The listed chassis dimensions are 483 × 548 × 132mm.
Provide suitable ventilation and follow the manufacturer's installation and operating instructions.
The series includes three models: A213, A215 and A218.
The A213 delivers 2 × 1300W RMS at 8Ω and 2 × 1750W RMS at 4Ω.
The A215 is rated at 2 × 1500W RMS at 8Ω and 2 × 2000W RMS at 4Ω.
The A218 is the highest-output model, delivering 2 × 1800W RMS at 8Ω and 2 × 2300W RMS at 4Ω.
The supplied specifications list Bridge Mono Mode as N/A for all three models. They should therefore be selected and planned as stereo amplifiers unless the manufacturer confirms another operating mode.
All three models have a specified frequency response of 20Hz–20kHz.
Yes. The A213, A215 and A218 are all listed at 483 × 548 × 132mm.
They may be suitable for compatible passive line array systems. Check the loudspeaker impedance, power handling and system configuration before selecting an amplifier.