| Availability: | |
|---|---|
| Quantity: | |
Dragonstage
The DragonEvent L1200 combines transformer-based amplification with a two-channel Class BT circuit design for professional sound reinforcement.
Its stereo output ratings of 2 × 1200W at 8Ω and 2 × 1800W at 4Ω make it an option for large PA configurations and compatible subwoofer systems. For applications requiring a mono configuration, the amplifier also has a specified bridge mono output rating of 1100W RMS.
The L1200 features a frequency response of 20Hz–20kHz ±0.5%, a total harmonic distortion specification below 0.05%, and a signal-to-noise ratio of at least 102dB.
Balanced and unbalanced input impedance options support professional audio signal integration, while the XLR input and NL4 output connections provide the listed connection interfaces.
High stereo output: 2 × 1200W RMS at 8Ω and 2 × 1800W RMS at 4Ω.
Two-channel configuration: Designed for professional stereo amplification applications.
Class BT circuit design: Specified Class BT amplifier architecture.
Transformer power amplifier: Transformer-based amplifier type.
Bridge mono rating: Listed bridge mono output of 1100W RMS.
Professional frequency response: 20Hz–20kHz ±0.5%.
Low distortion specification: THD below 0.05% across 20Hz–20kHz.
Balanced and unbalanced input support: 20kΩ balanced / 10kΩ unbalanced.
Professional connections: 2 × XLR inputs and 2 × NL4 outputs.
Flexible AC supply specification: AC110V / AC220V, 50Hz / 60Hz.
Specification | L1200 |
|---|---|
Amplifier Type | |
Circuit Design | Class BT |
Number of Channels | 2 Channels |
Stereo Output Power (8Ω) | 2 × 1200W RMS |
Stereo Output Power (4Ω) | 2 × 1800W RMS |
Bridge Mono (RMS) | 1100W |
Frequency Response | 20Hz–20kHz ±0.5% |
Slew Rate | 30V/μs |
THD (20Hz–20kHz) | <0.05% |
Damping Factor | >280 |
Signal-to-Noise Ratio | ≥102dB |
Input Sensitivity | 1Vrms |
Input Impedance | 20kΩ Balanced / 10kΩ Unbalanced |
Input Connectors | 2 × XLR |
Output Connectors | 2 × NL4 |
Power Supply | AC110V / AC220V, 50Hz / 60Hz |
Product Dimensions (W × H × D) | 480 × 132 × 548mm |
Packing Dimensions | 605 × 190 × 560mm |
Net Weight | 30.8kg |
Gross Weight | 33.2kg |
The L1200 is positioned as a high-power professional amplifier within the L Series.
Model | Position | Application |
|---|---|---|
L300 | Compact Professional Amplifier | Small and medium PA systems |
L1200 | High Power Professional Amplifier | Large PA systems, subwoofers and event sound reinforcement |
The L1200 is the option to consider when your sound system requires a higher specified output level than the compact L300 configuration.
Before selecting the amplifier, compare its rated output with the loudspeaker's impedance and power-handling requirements. The L300 specifications have not been provided, so a detailed numerical comparison is not available.
The DragonEvent L1200 can be considered for the following professional audio environments:
Large PA Systems: Two-channel amplification for compatible high-output loudspeaker configurations.
Subwoofer Systems: An amplifier option for subwoofer setups when the speaker impedance and power requirements match.
Live Concerts: Professional amplification for concert sound reinforcement systems.
Festival Stages: Suitable for planning high-output event PA configurations.
Touring Sound Systems: A professional amplifier option for mobile sound production setups.
Event Rental Companies: A high-output model for rental inventories serving larger events.
Professional Sound Installations: Suitable for compatible fixed audio systems requiring substantial amplifier output.
Before integrating the L1200 into a professional sound system, check the loudspeaker specifications and installation requirements.
Match the amplifier's output rating to the connected loudspeaker's power handling.
Confirm the loudspeaker's nominal impedance before selecting the operating configuration.
Check the manufacturer's instructions before using bridge mono operation.
Verify that the input signal connections are compatible with the listed XLR inputs.
Confirm the speaker cable and connector configuration for the NL4 outputs.
Check the available AC supply and ensure it matches the amplifier's specified voltage and frequency.
Allow adequate ventilation around the amplifier during operation.
Confirm rack or equipment-space dimensions before installation.
The L1200 is specified as a two-channel transformer power amplifier.
The L1200 provides 2 × 1200W RMS at 8Ω and 2 × 1800W RMS at 4Ω.
Yes. Its supplied specifications list a bridge mono output of 1100W RMS. Always confirm the manufacturer's bridge-mode instructions and speaker impedance requirements before use.
The L1200 is specified as a transformer power amplifier with a Class BT circuit design.
The listed interfaces are 2 × XLR inputs and 2 × NL4 outputs.
It can be considered for compatible subwoofer configurations. Check the subwoofer impedance, power handling and amplifier operating requirements before connecting the system.
The product dimensions are 480 × 132 × 548mm, and the packing dimensions are 605 × 190 × 560mm.