6061 Aluminium Double Swivel Coupler for Deco Truss, Lighting Outriggers & Banner Supports

• 6061 Aluminium Construction
  Specified as 6061 aluminium for a lightweight truss connection accessory.

• 32–35mm Tube Compatibility
  Intended for compatible tubes within the stated diameter range. Check the actual tube dimensions and receiver profile before ordering.

• Double Swivel Coupler Design
  The reference product describes two rotating truss receivers connected by a bolt. Confirm the exact design of the DragonEvent version.

• 50kg Safe Working Load
  The supplied specification states an SWL of 50kg. Confirm the applicable load direction and rating conditions before use.

• Lightweight 0.187kg Per Piece
  The stated product weight is 0.187kg per piece.

• 70 Pieces Per Pack
  The supplied pack quantity is 70 pieces, suitable for projects requiring multiple compatible couplers.

• For Outriggers and Banner Supports
  The reference product describes applications including lighting outriggers, banner holders and compatible truss connections.

The DragonEvent Double Swivel Coupler may be considered for compatible installations such as:

• Lighting outriggers on small-diameter truss

• Banner support structures

• Compatible cross-member connections

• Exhibition and trade-show displays

• Event structure assembly

• Replacement of compatible double couplers

Application suitability depends on the actual tube dimensions, receiver geometry, fasteners and load direction.

For related structure components, explore DragonEvent Truss & Rigging and Truss & Rigging Accessories.

Compatibility & Installation Notes

Before purchasing or installing this coupler, review the following points:

1. Confirm the tube diameter
   The supplied specification identifies compatibility with 32–35mm tubes. Measure the actual tube and verify the receiver profile.

2. Check both connection points
   Confirm that both receivers fit the intended tubes or truss sections and that the coupler geometry suits the required connection.

3. Verify the fastening hardware
   The reference product describes an M8 wing-nut closure. Confirm the actual hardware supplied with the DragonEvent product before installation.

4. Understand the load direction
   The supplied SWL is 50kg, but the reference information distinguishes tensile loading from shear loading. Confirm the applicable rating for the actual load direction and installation configuration.

5. Inspect before use
   Check the coupler, bolt, nuts and contact surfaces for visible damage, deformation, wear or other conditions that could affect the connection.

6. Assess the complete structure
   The coupler, connected tubes, truss, fasteners and supporting structure must all be suitable for the intended application. For suspended or structurally significant installations, verify the relevant documentation and installation requirements before use.

1. What is the DragonEvent double swivel coupler used for?

It is intended for compatible tubular truss connections and may be considered for lighting outriggers, banner supports and other suitable event structures.

2. What material is the coupler made from?

The supplied specification identifies the material as 6061 aluminium.

3. What tube diameter does it fit?

The stated compatible tube diameter range is 32–35mm. Confirm the actual tube dimensions and receiver geometry before ordering.

4. What is the safe working load?

The supplied specification states an SWL of 50kg. The applicable load direction and rating conditions should be confirmed before use.

5. How much does each coupler weigh?

The stated product weight is 0.187kg per piece.

6. How many pieces are included in a pack?

The supplied product information specifies 70 pieces per pack.

7. Does it include an M8 wing nut?

The reference product describes an M8 wing-nut closure, but the included hardware for the exact DragonEvent product has not been independently confirmed. Verify the package contents before ordering.

8. Can it be used for banner supports or lighting outriggers?

These applications are described in the reference product information. Suitability depends on the actual coupler design, tube compatibility, load direction and requirements of the complete structure.

9. Is the 50kg SWL valid for every loading direction?

Not necessarily. The reference product distinguishes a maximum tensile load from a lower maximum shear load. Confirm the rating conditions for the exact DragonEvent product and intended installation.