loading
Compact 1.2 × 0.6m portable DJ table with a 6061-T6 aluminum frame, 18mm plywood work surface and black anti-slip Hexa finish. The removable legs store underneath the tabletop for easier transport, making it a practical workstation for mobile DJs, wedding DJs, musicians and small event operators
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
Not every DJ needs a large booth or a 2.4m workstation.
For mobile DJs, wedding entertainers and small event operators, a compact table may provide enough space for a controller, mixer and laptop without taking up unnecessary space in the vehicle or venue.
This 1.2m Portable DJ Table combines a rigid aluminum frame with a black plywood working surface and four removable legs.
The assembled table measures:
1200 × 600 × 900mm (W × D × H)
approximately:
47.2 × 23.6 × 35.4in
After the performance, the legs can be removed and secured underneath the tabletop using integrated storage clips.
This makes the table practical for customers who frequently move their equipment between:
Weddings → Private Parties → Clubs → Corporate Events → Small Performances
Unlike a large modular DJ table, this product provides a complete workstation using one tabletop section.
Explore additional workstation configurations in DJ Booths & Tables.
The tabletop provides:
1200mm width × 600mm depth
This is suitable for many single-controller DJ setups, depending on the actual equipment dimensions.
A compact tabletop also makes it easier to position equipment in smaller venues where floor space is limited.
The assembled table height is:
900mm / 35.4in
This provides a standing workstation for DJ controllers, mixers and similar equipment.
Buyers should compare this height with their preferred operating position, especially when using tall laptop stands or flight cases.
The reference construction uses:
6061-T6 aluminum alloy
with approximately 3mm frame material thickness.
The frame supports the removable-leg arrangement and provides the main structure for the equipment table.
The working surface uses:
18mm plywood
with a textured black anti-slip finish.
This type of surface helps reduce unwanted sliding of equipment during normal operation, although equipment still needs to be positioned and secured appropriately.
Instead of a permanent folding-leg structure, the table uses four detachable legs.
This allows the tabletop and legs to be separated during transportation.
It also avoids the need to handle a fully assembled 900mm-high table during loading and unloading.
The underside includes storage clips for the removed legs.
The practical benefit is simple:
Remove the legs → Clip them underneath → Transport the table as one organized set.
This reduces the chance of leaving loose legs behind after an event.
The table is intended for operators who regularly:
set up → perform → dismantle → transport → store
their equipment.
For these buyers, manageable dimensions and organized storage are important parts of choosing a workstation.
Specification | Details |
|---|---|
Product Type | Portable DJ Equipment Table |
Overall Dimensions | 1200 × 600 × 900mm |
Imperial Dimensions | 47.2 × 23.6 × 35.4in |
Tabletop Sections | 1 |
Frame Material | 6061-T6 Aluminum Alloy |
Frame Thickness | Approx. 3mm |
Tabletop Material | 18mm Plywood |
Tabletop Finish | Black Hexa Anti-Slip Surface |
Legs | 4 Removable Legs |
Leg Storage | Integrated Under-Table Clips |
Reference Total Weight | Approx. 20.9kg / 46.1lb |
Main Applications | DJ, Wedding, Party, Event Workstation |
Product note: Final production weight, packaging dimensions and load capacity should be confirmed against the actual DragonEvent manufacturing specification before publishing them as guaranteed values.
This table is particularly suitable for a DJ using a compact equipment arrangement such as:
**1 × DJ Controller
1 × Laptop / Laptop Stand
Essential Accessories**
Actual fit depends on the controller dimensions and cable clearance.
Wedding DJs often work in venues where available space is limited.
A 1.2m portable table can provide a dedicated workstation without occupying the area required by a much larger DJ booth.
For birthday celebrations, house parties and small gatherings, a compact DJ workstation is usually easier to position than a large modular performance table.
The table may also serve as a workstation for suitable:
small audio mixers;
compact lighting controllers;
laptops;
event control equipment.
The actual equipment weight and operating dimensions must be checked before use.
For smaller rental companies, compact DJ tables can be useful stock items because customers frequently need a simple equipment workstation rather than a full decorative DJ booth package.
Start by measuring the equipment you will actually place on the table.
For example, if your controller measures:
700 × 400mm
then the remaining nominal tabletop space is:
500mm across the width
and:
200mm in depth
before allowing for cables, laptop stands and other accessories.
Many buyers look at the table width but forget that rear connections require additional space.
Make sure your controller, mixer or flight case fits comfortably within the 600mm depth, including any necessary cable access.
The finished height is 900mm.
This is suitable for many standing setups, but not every DJ prefers the same operating height.
Check whether your controller will sit directly on the tabletop or on top of a flight case.
Choose this 1.2m table when your equipment fits within one compact working surface.
If your setup includes multiple decks, mixers and other devices spread across a much greater width, consider a larger modular DJ table.
Although the table has removable legs, its tabletop remains a 1.2m × 0.6m rigid section.
Make sure it fits your vehicle and storage area.
The reference unit weighs approximately 20.9kg, so plan handling accordingly.
For a basic mobile DJ workstation:
**1 × 1.2m DJ Tabletop
4 × Removable Table Legs
Under-Table Leg Storage Clips**
Then add your own:
DJ Controller + Laptop + Power & Audio Cables
A separate decorative DJ facade is optional, not a requirement for using the table.
For practical equipment organization and setup items, browse DJ Accessories.
The two products serve different equipment layouts.
1.2m DJ Table | 2.4m Modular DJ Table | |
|---|---|---|
Working Width | 1200mm | 2400mm |
Tabletop Sections | 1 | 2 |
Legs | 4 | 8 |
Connection Clamps | Not required | 2 |
Main Buyer | Mobile DJ with compact equipment | DJ with multiple equipment units |
Main Advantage | Smaller footprint | More working space |
Choose the 1.2m table when one controller and supporting equipment fit comfortably on a compact tabletop.
Choose the 2.4m table when the actual equipment layout justifies a wider working surface.
A 1.2m table is not automatically suitable for every DJ controller.
Check equipment width, depth and any flight case dimensions before ordering.
Your equipment may fit on the tabletop but still need additional room for connectors, power adapters and cable bends.
Plan that space before purchasing.
This table uses detachable legs that can be stored underneath.
It is not a one-piece folding-leg workstation.
The table is portable, but the reference complete set weighs approximately 20.9kg / 46.1lb.
Portable does not necessarily mean suitable for every customer to carry alone.
If a compact controller, laptop and mixer fit within 1.2m, a larger table may create additional transport and storage requirements without improving the actual setup.
This product is designed to support suitable DJ and event equipment.
It is not a platform for people to stand or perform on.
DJ Booths & Tables — Compare different DJ workstation formats.
Portable Folding Professional Event Table for DJ, Sound & Lighting Consoles — An alternative console-style workstation for customers who want a different folding table arrangement.
DJ Accessories — Explore useful equipment setup, mounting and cable-management accessories.
The assembled dimensions are 1200 × 600 × 900mm, approximately 47.2 × 23.6 × 35.4in.
Yes. The compact working surface and removable legs make it suitable for mobile DJ equipment setups where the table dimensions and load requirements are appropriate.
One tabletop section measuring 1.2 × 0.6m.
Yes. The table uses four detachable legs.
The legs can be secured underneath the tabletop using integrated storage clips.
The reference specification uses 6061-T6 aluminum alloy with approximately 3mm frame material thickness.
It uses 18mm plywood with a black Hexa-style anti-slip surface.
The reference complete unit weighs approximately 20.9kg / 46.1lb, including the legs. Confirm the final DragonEvent production weight before publishing it as a guaranteed value.
Yes, provided their combined dimensions, weight and operating arrangement fit the actual table specification.
No. The reference design uses a rigid tabletop with removable legs, rather than a tabletop that folds in half.
They can be positioned side by side, but they should not be represented as one mechanically connected workstation unless compatible joining hardware and a suitable connection arrangement are confirmed.
No. This model is a standalone 1.2m DJ workstation. The larger model uses two 1.2m sections connected to form a 2.4m working surface.
