Portable aluminum DJ truss booth featuring two 2m (6.56ft) vertical truss towers, detachable 18×47.5in DJ workstation, black or white front facade, and a 2m overhead lighting bar. Includes two wide steel base plates and compatible assembly connectors. Designed for mobile DJs, weddings, parties, clubs, and small event rental businesses.
Lighting fixtures and DJ equipment are not included in the standard booth package.
| Availability: | |
|---|---|
| Quantity: | |
Dragon Stage
For mobile DJs, a standard table is often enough to hold a controller and laptop. But when you also want an organized front facade and an overhead lighting position, several separate stands can quickly make the setup more complicated.
This 2m Aluminum DJ Truss Booth combines three practical elements in one system:
A detachable DJ equipment table
A front facade to conceal equipment and cables
An overhead mounting bar for compatible lighting fixtures
The booth uses two vertical aluminum truss sections supported by separate steel base plates. A detachable mesh tabletop sits between the towers, while a black or white Lycra facade creates a cleaner front-facing appearance.
A 2m-long overhead bar connects the upper part of the structure and provides a mounting position for compatible lighting equipment, subject to the complete assembly's verified load limits.
For wedding DJs, mobile entertainers, party organizers, and small event companies, this configuration offers an alternative to purchasing separate DJ facade stands, equipment tables, and lighting stands.
The booth uses two vertical aluminum truss sections, each approximately 2m (6.56ft) long.
The exposed truss structure creates a professional event appearance suitable for weddings, DJ performances, exhibitions, and club environments.
The DJ workstation measures approximately:
47.5in wide × 18in deep (1207 × 457mm)
The mesh tabletop can be detached from the supporting frame for transportation and storage.
Two cable-routing openings help organize connections between DJ controllers, mixers, laptops, and related equipment.
The table position can be adjusted using the compatible mounting arrangement.
The included facade system uses a removable fabric panel measuring approximately:
45in wide × 32in high (1143 × 813mm)
Available color options:
Black
White
The fabric panel helps conceal cables, equipment cases, and the space underneath the DJ work surface.
The facade mounting arrangement also allows positioning adjustments.
A 2m (6.56ft) horizontal metal bar is mounted between the upper sections of the truss towers.
The bar has a stated tube diameter of approximately 2in (50.8mm).
It provides a mounting position for appropriately selected lighting fixtures and clamps.
The product photo illustrates a setup with two moving-head lights and four suspended lighting fixtures. These are application examples rather than standard included items.
Any equipment attached to the overhead bar must be compatible with its diameter, mounting hardware, and verified structural capacity.
The booth includes two black steel base plates.
Each base plate measures approximately:
39 × 13in (991 × 330mm)
The plates support the vertical truss sections and help define the floor footprint of the structure.
The complete installation must be assessed for floor conditions, equipment loading, and stability.
The tabletop, facade and associated truss connections form a modular assembly.
This is practical for event companies that regularly transport and reinstall their DJ presentation equipment.
Specification | Details |
|---|---|
Brand | DragonStage |
Product Type | Aluminum DJ Truss Booth |
Vertical Truss Quantity | 2 pcs |
Vertical Truss Length | 2m / 6.56ft each |
Truss Section | Approx. 12in nominal |
Main Structure Material | Aluminum |
Base Plate Material | Steel |
Base Plate Quantity | 2 pcs |
Base Plate Dimensions | 13×39in / approx. 330×991mm |
Detachable Table Size | 18×47.5in / approx. 457×1207mm |
Tabletop Design | Mesh with 2 cable openings |
Facade Panel Size | 32×45in / approx. 813×1143mm |
Facade Material | Lycra fabric |
Facade Color | Black / White |
Overhead Bar Length | 2m / 6.56ft |
Overhead Bar Diameter | Approx. 2in / 50.8mm |
Table Position | Adjustable mounting arrangement |
Finish Options | Silver truss with black bases; custom finishes by inquiry |
Main Applications | DJ, Wedding, Party, Club, Event, Exhibition |
Load Capacity | Confirmation required |
Packing Dimensions | Confirmation required |
Lighting Fixtures | Not included |
The dimensions above are based on the original DragonStage product specifications. Exact external dimensions, mounting positions, material grades, and equipment load limits should be confirmed for the supplied version.
The reference configuration includes:
Component | Quantity |
|---|---|
2m Aluminum Vertical Truss | 2 pcs |
Black Steel Base Plate | 2 pcs |
Detachable Mesh DJ Tabletop | 1 pc |
Front Facade Fabric Panel | 1 pc |
2m Overhead Metal Bar | 1 pc |
Compatible Connectors and Clamps | 1 matched set |
The facade color can be selected according to the available options.
Not included unless ordered separately:
Moving-head lights
Suspended PAR or effect lights
DJ controller and mixer
Laptop and audio equipment
Power and signal cables
The exact package contents should be confirmed in the quotation.
For wedding DJs, the booth combines a raised lighting position, an equipment work surface, and a front facade in a single visual arrangement.
A white front panel is suitable for many wedding and ceremony environments, while black offers a more understated appearance.
Mobile DJs working at private parties, birthdays, and corporate events can use the system as a reusable workstation and presentation frame.
Before purchase, consider the vehicle space needed for the 2m-long components and the two large base plates.
Rental companies can offer the booth as a repeatable DJ presentation package.
The detachable components allow the same basic structure to be used with different facade colors and separately selected lighting equipment.
The exposed aluminum truss appearance fits club events and entertainment venues where the truss structure is intended to remain visible.
The booth can also serve as a compact operator or presentation station for temporary exhibitions and promotional activities.
The tabletop is approximately 1207mm (47.5in) wide and 457mm (18in) deep.
Measure the equipment you plan to place on the table, including:
Controller or mixer
Laptop or laptop stand
Media players
Small audio accessories
Power adapters and cable connections
For example, a 700mm-wide controller leaves approximately 507mm of the nominal tabletop width for other equipment.
This is a dimensional comparison only; the actual usable space depends on equipment positioning and cable clearance.
Each vertical truss is 2m long.
Allow sufficient clearance for the upper bar, any mounted fixtures, and necessary installation space.
Do not treat the 2m truss section length as a verified exact overall assembled height.
Each steel base measures approximately 991×330mm.
Confirm the intended floor layout, including the bases, cables, performer access, and any audience separation required.
Choose black for a darker DJ presentation or white for lighter wedding and formal event settings.
Confirm the selected color when ordering.
If your lighting equipment already uses separate floor stands, you may only need a simple DJ table or facade.
If you want a combined booth and overhead mounting arrangement, this truss booth may be more suitable.
The overhead mounting arrangement must be checked before attaching fixtures.
For a mobile DJ who already owns a controller, laptop, sound equipment, and lighting, the minimum practical purchase is:
1 Complete DJ Truss Booth Set
This includes the vertical truss structure, bases, detachable workstation, selected facade panel, overhead bar, and matched assembly hardware.
You do not need to purchase additional lighting fixtures simply to use the booth as a DJ workstation.
If you later want to add lighting, upgrade the setup by selecting suitable clamps and fixtures after confirming the mounting and loading requirements.
If you do not need a complete overhead truss structure, explore our DJ Booths & Tables for more compact DJ workstation options.
Explore DJ & Entertainment Equipment for accessories and related equipment used around mobile DJ setups.
For a simpler configuration without the twin truss towers, consider our Portable Folding DJ Event Table.
The product photo shows several lighting fixtures mounted above the DJ workstation.
These illustrate how the booth may be configured.
The standard truss booth package does not automatically include the lights.
The overhead bar has a stated diameter of approximately 50.8mm.
Clamp selection must consider the actual tube diameter, fixture attachment, fasteners, and load requirements.
The tabletop is approximately 457mm deep.
Some large controllers, turntable arrangements, or multi-device setups may need a deeper work surface.
Measure your equipment before ordering.
A horizontal bar may appear substantial, but allowable loading depends on the complete structure, connections, fixture positions, and installation conditions.
A verified allowable load has not been provided for this assembly.
The booth contains 2m-long truss sections and an overhead bar of the same nominal length.
Check vehicle and storage dimensions before purchasing.
The two vertical aluminum truss sections are each 2m (6.56ft) long.
The exact assembled overall height should be confirmed according to the bases and top connection arrangement.
The detachable mesh tabletop measures approximately 47.5×18in (1207×457mm).
It includes two openings for cable routing.
The reference design provides an adjustable mounting arrangement for the tabletop and facade.
The exact adjustment positions and available range should be confirmed for the supplied version.
Yes. The reference package includes a Lycra fabric facade panel.
Black and white are listed color options.
The structure has an overhead lighting bar, but the equipment load and mounting arrangement must be checked first.
Do not assume the pictured lighting configuration has a verified load rating.
No. The lighting equipment shown in the product image is for demonstration and is sold separately unless specifically included in a quotation.
It is a detachable modular booth rather than a confirmed one-piece folding structure.
The tabletop, facade, truss components, and connections can be separated for transportation.
Yes. The structure is suitable for wedding DJ applications where a front facade and overhead lighting position are desired.
The original product information lists silver, black, and customized finishes.
Please confirm finish availability and any price difference before ordering.
Outdoor suitability cannot be determined from the product photo or dimensions alone.
Weather, wind exposure, ground conditions, attached equipment, and stabilization requirements must be reviewed for the proposed setup.
Whether you are buying your first DJ booth or adding a new presentation option to your rental inventory, this aluminum truss booth combines a workstation, front facade, and overhead lighting position in one modular package.
Before ordering, please confirm:
Quantity required
Preferred facade color
Preferred truss finish
DJ controller and equipment dimensions
Any intended overhead lighting equipment
Delivery destination
Contact DragonStage for product pricing, configuration confirmation, and shipping options.