1. Modular 3m × 3m Display Configuration

The system creates an approximately:

3m wide × 3m high
9.84ft × 9.84ft

temporary display structure.

This size works well when a buyer needs a more substantial presentation area than a conventional pull-up banner or small backdrop.

2. Black Aluminum Ladder Truss Construction

The main vertical elements use CL30 black aluminum ladder truss.

The black finish helps the supporting structure visually recede behind:

• graphics;

• banners;

• promotional displays.

This can be particularly useful for exhibitions where the content should attract more attention than the supporting frame.

3. Adjustable Clamp Plates

The supplied adjustable clamp plates allow support components to be positioned along the frame according to the intended display arrangement.

This gives the system more flexibility than a permanently welded rack with fixed attachment points.

4. Horizontal Support Bars

Horizontal tubes with clamps can be positioned between the vertical frames.

They can form support lines for compatible display items according to the selected configuration.

Before mounting heavier displays, always confirm the item weight and intended connection method.

5. Integrated Display Platforms

The configuration also includes black 1m-long platforms.

These provide additional display positions within the rack system and make the product useful for more than hanging graphics alone.

Potential uses include presentation of compatible lightweight products or promotional materials.

6. Stable T-Base Format

The vertical frames use black aluminum T-shaped base structures.

The standard T-base dimension supplied is:

0.35 × 1.25m

The actual stability of the complete system still depends on:

• layout;

• displayed items;

• floor condition;

• environment;

• external loads.

7. Designed for Repeated Setup

The rack is made from detachable modular components rather than one large welded frame.

This is particularly useful for:

• rental companies;

• exhibition contractors;

• event suppliers;

• companies attending multiple trade shows.

8. Flight Case Packing

The complete system is packed in flight cases.

Confirmed packing information:

Packing Volume: approximately 2 CBM

Packing Weight: approximately 220kg / 485lb

This should be considered before purchasing, especially for mobile companies planning vehicle space and handling requirements.

Technical Specifications

Standard Component List

Exhibition Booth Display

For trade shows, the rack can provide a reusable structural framework behind or inside a booth.

It can be used to organize:

• graphics;

• banners;

• promotional information;

• compatible display accessories.

For broader booth equipment and temporary event setup products:

https://www.dragonevent.com/Exhibition-Event-Setup-pl08054276.html

Product Presentation

The combination of vertical frames, horizontal bars and platforms makes the system useful when products or promotional items need to be presented at different levels rather than simply hung from one horizontal beam.

Corporate Event Display

Suitable for:

• product launches;

• brand displays;

• sponsor walls;

• conference displays;

• temporary promotional installations.

Event Rental Inventory

This is one of the more natural DragonEvent applications.

A rental company can dismantle and store the components after an event, then rebuild the system for another exhibition or promotional setup.

Because the components are adjustable, the inventory can be more flexible than a single-purpose fixed display frame.

Banner and Signage Support

The 3m width provides a useful display area for compatible banners and signs.

Before ordering, provide the finished banner or sign dimensions so the attachment positions can be checked.

What is the overall size of this display rack?

The standard configuration is approximately:

3m wide × 3m high
9.84ft × 9.84ft

Is this a stage?

No.

Although the original DragonTruss product name included “stage,” the product shown is more accurately a portable modular display rack / exhibition display system.

It is intended for temporary presentation and display applications rather than as a platform for people to stand on.

Can the height be adjusted?

The system uses modular ladder truss sections and adjustable clamp plates, allowing display-component positions to be configured.

However, the standard pictured configuration is approximately 3m high.

If you need a different finished system height, confirm the required dimensions before ordering.

Can I hang a banner on it?

Yes, banner and signage display is a natural application.

Please provide:

Banner Width × Banner Height

before ordering so the intended positioning can be reviewed.

Can it hold an LED screen?

Possibly, but this cannot be determined from the product dimensions alone.

The supplied information does not include a verified load capacity for an LED screen.

Before using it for a screen, provide:

• screen size;

• total screen weight;

• mounting method;

• indoor/outdoor use.

We can then determine whether this product is appropriate or whether a dedicated screen support system is required.

Can it be used outdoors?

The modular aluminum components can be used in temporary event environments, but outdoor structural suitability cannot be assumed.

Banners and screens can create significant wind loads.

For outdoor installations, especially with large solid graphics or screens, the complete support and stability requirements must be reviewed separately.

Is it suitable for rental companies?

Yes.

The modular components, adjustable clamps and flight-case packing make this configuration especially suitable for companies that repeatedly transport and rebuild temporary displays.

How much space does it need for shipping?

The confirmed packing information is approximately:

2 CBM

with a packed weight of approximately:

220kg / 485lb.