Designed for 289 × 289 mm / 290 × 290 mm Square Truss

The sleeve is designed around the common approximately 290 mm (11.4 in) square truss cross-section.

This makes it suitable for many event square truss applications, but buyers should still confirm the actual outside dimensions of their truss before ordering.

Multiple Lengths Available

Unlike a single fixed-length truss cover, DragonEvent offers multiple length options so the sleeve can be matched to the actual truss segment being used.

Choose the SKU corresponding to your truss length.

Custom lengths can also be produced when required.

Stretch Lycra Fabric

The elastic fabric stretches around the truss profile and follows its shape, creating a smooth, fitted appearance.

This also makes installation considerably simpler than building rigid decorative panels around a truss.

Pull-Over Installation

The sleeve slides over the truss section, so separate hook-and-loop fastening is generally unnecessary for this style of cover.

For temporary event setups, this makes installation and removal straightforward.

Suitable for Lighting Effects

White truss covers work particularly well with event lighting.

Lighting can be positioned inside or outside the covered truss to turn an otherwise functional truss column into part of the visual design.

Reusable for Event and Rental Inventory

For DJs, wedding companies and event rental businesses, the cover can be stored and reused across different jobs when the truss section and cover length match.

Important Compatibility Note

Truss section size and truss length are two different specifications.

Before ordering, check:

A. Truss cross-section:
289 × 289 mm or 290 × 290 mm.

B. Truss segment length:
Choose the cover length corresponding to your actual truss section.

Do not order only by terms such as “F34” or “12-inch truss” without checking the actual outside dimensions.

How to Choose the Correct Size

Choosing a truss cover is simpler than choosing structural truss, but there are still two measurements you need.

Step 1 – Measure the Truss Section

Measure the outside width and depth of the square truss.

This product is intended for approximately:

289 × 289 mm / 290 × 290 mm
or approximately
11.4 × 11.4 inches

If your truss has a significantly different cross-section, contact us before ordering.

Step 2 – Check the Truss Length

Then measure the actual truss segment.

For example, if you have several different truss lengths in your inventory, select a corresponding cover for each length rather than purchasing every sleeve in one size.

Step 3 – Count Your Truss Segments

Normally:

1 truss segment = 1 matching truss cover

So if your setup uses four vertical truss sections that you want completely covered, the practical starting quantity is 4 covers.

For rental inventory, keeping additional covers can also be useful for replacement or different event configurations.

DJ Truss Totems

One of the most natural applications is a vertical DJ truss totem.

Instead of leaving the aluminum truss exposed, a white sleeve creates a cleaner column that can be illuminated with an LED fixture from the bottom or inside the structure.

This approach is particularly suitable for mobile DJs, wedding DJs and small production companies.

Explore more DJ & Entertainment Equipment for building a complete DJ setup.

Weddings and Parties

White covers are particularly suitable for weddings because exposed industrial-looking aluminum can visually conflict with white draping, flowers and other decorative elements.

The sleeve allows the truss to blend more naturally into the event décor.

Exhibition and Trade Show Displays

Square truss used for booth structures, product displays and branded installations can be covered when a cleaner presentation is preferred.

See more Exhibition & Event Setup Products for related temporary event equipment.

Corporate Events

For conferences, product launches and branded events, covered truss can provide a more finished appearance around lighting, signage and display areas.

Decorative Lighting Columns

A covered vertical truss can also function as a decorative lighting column.

White stretch fabric diffuses and reflects colored light, allowing the same physical truss to take on different appearances for different events.

Buying Notes

When Should You Use a Truss Cover?

A truss cover makes sense when the truss is visible to guests and appearance matters.

Typical examples include:

• DJ booths

• Wedding stages

• Entrance displays

• Lighting totems

• Corporate events

• Exhibition booths

• Product launches

• Party installations

If the truss is hidden backstage or used purely as working event infrastructure, a decorative sleeve may not be necessary.

In other words:

Buy the cover where appearance adds value. You do not necessarily need to cover every truss in the system.

Important Use & Safety Notes

A truss cover is a decorative accessory, not a structural component.

It does not increase truss capacity, reinforce the structure, or replace any structural connection or safety component.

When lighting is used with the fabric, maintain appropriate separation from heat sources and follow the requirements of the lighting equipment.

The reference product also specifically warns that this type of scrim is intended for temporary use and should be kept away from open flames, sparks, direct heat and electrical hazards.

Fire-retardant certification should not be assumed for the DragonEvent version unless the specific fabric supplied for your order has the corresponding verified certification.

What size truss does this cover fit?

It is designed for square box truss with an outside cross-section of approximately 289 × 289 mm or 290 × 290 mm (about 11.4 × 11.4 inches).

Always measure your truss before ordering.

Is the length fixed?

No. DragonEvent offers multiple length options, and custom lengths can also be supplied.

Choose the cover according to the length of your individual truss segment.

Can I use it on a 1m, 1.5m or 2m truss?

Yes, provided you select the corresponding cover length and your truss cross-section is compatible.

The product will be offered with multiple length SKUs rather than only one fixed length.

Does one cover wrap all four sides of the truss?

Yes. This is a sleeve-style cover designed to surround the square truss section.

Do I need Velcro to install it?

This style is designed as a pull-over stretch sleeve, so a separate Velcro closure is generally not required.

Can I put LED lights inside the covered truss?

The white stretch fabric can be used to create decorative lighting effects, and this is one of the common applications of this type of truss cover. The reference products specifically describe using lighting inside or outside the covered truss. IDJNOW

Keep suitable clearance from heat-producing equipment and follow the lighting manufacturer's installation instructions.

Can I use the same cover on different brands of truss?

Possibly, but do not choose by brand alone.

What matters is the actual outside cross-section and length of the truss. If your square truss measures approximately 289 × 289 mm or 290 × 290 mm, select the corresponding length and confirm fit before purchasing a larger quantity.

How many covers should I buy?

Start by counting the individual truss segments you want to cover.

For most straightforward installations:

1 visible truss segment → 1 matching cover

For example, four independently covered vertical truss columns normally require four covers.